Low voltage dimmers
Low voltage led Dimmers
There are many Led dimmers to choose from. Even full smart lighting systems as Zigbee of RF series. In this category we divide dimmers into 3 kategories.
On the Wire dimmers
These are installed between led strip and driver wire. With DC connectos.
Soldered dimmers
These dimmers are installed with led strip lights, inside aluminum profile. Must be soldered.
Smart lighting systems
These are installed before led lights and after led driver. They can be contolled with separate remote or software (ie . Philips HUE). Dimming type is usually non flicker PWM.
There is also Zigbee or RF smart lighting systems that can do much more than dim.
Â
Â
Â
Â
-
LED strip TOUCH DIMMER 12-24V, max. 72W- 12-24 Volt
- max 72W
- Dimming with long touch
- blue light with button
- Soldered inside Led strip profile
- VaLO — LED receiver for 12V-36V led strips, 8A
- single colour leds
- max 192W 24V, only 0,5W idle!
- installed between led and driver
- Push-Dim (0V) option
- VaLO — LED receiver for 12V-36V led strips and panels CCT/RGB, 20A
- single colour, RGBW and CCT leds
- max 480W 24V, only 0,5W idle!
- installed between led and driver
- Master/Slave for infinite loads
- LED wall Dimmer/controller for CCT led lights, max.400W
- 12-24 Volt
- 1 lightgroup, max 400W
- Dimming and CCT adjust
- 4 memory sets
- Installed between driver and light
- LED wall Dimmer/controller for RGB+W led lights, max.400W
- 12-24 Volt
- 1 lightgroup, max 400W
- Dimming and RGBW adjust
- 4 memory sets
- Installed between driver and light
- LED wall Dimmer/controller for led lights, max.400W
- 12-24 Volt
- 1 lightgroup, max 400W
- Dimming
- 4 memory sets
- Installed between driver and light
- VaLO Zigbee LED receiver 12V-36V - for RGBW led strips 20A
- for RGBW lights
- Philips HUE compatible, Zigbee 3.0
- max 480W 24V, only 0,5W Idle
- Installed between driver and led
- Find n Bind, Touchlink, Network
- VaLO Zigbee LED receiver 12V-36V - for CCT led strips 20A
- for CCT lights
- Plilips HUE compatible, Zigbee 3.0
- max 480W 24V, only 0,5W Idle
- Installed between driver and led
- Find - Bind, Touchlink, Network
- VaLO Zigbee LED receiver 12V-36V - for single colour led strips 20A
- for single colour lights
- Philips HUE compatible, Zigbee 3.0
- max 480W 24V, only 0,5W Idle
- Installed between driver and led
- Find n Bind, Touchlink, Network
- VaLO Zigbee LED receiver 12V-36V - for single colour led strips 8A
- for single colour lights
- Plilips HUE compatible, Zigbee 3.0
- max 192W 24V, only 0,5W Idle
- Installed between driver and led
- Find n Bind, Touchlink, Network
- LED strip CCT control and dimming 12-24V, max. 192W for aluminium profile installations
- 12-24 Volt
- max 192W
- Dimming and CCT adjust with wave of hand
- blue/orange light to show current operating mode
- Soldered inside Led strip profile
- VaLO Zigbee 5 channel LED receiver 12V-36V - for Single colour, CCT, RGBW or RGB+CCT led lights 30-40A
- for CCT, RGBW OR RGB+CCT lights
- Philips HUE compatible, Zigbee 3.0
- max 960W 24V, only 0,5W Idle
- Installed between driver and led
- Find - Bind, Touchlink, Network
- LED strip button DIMMER 12-24V, max. 72W
- 12-24 Volt
- max 72W
- Dimming with long press
- Max profile height 12mm
- Soldered inside Led strip profile
- LED strip WIRE DC-DC DIMMER 12-24V BLACK
- 12-24 Volt
- max 144W
- long press dimming
- recommended to use with TRIAC drivers
- Installed between driver and led light
- LED strip WIRE DC-DC DIMMER 12-24V WHITE
- 12-24 Volttia
- max 144W
- long press dimming
- recommended to be used with TRIAC drivers
- Installed between driver and led light
- VaLO DALI2 DT8 5 channel LED receiver 12V-36V - for Single colour, CCT, RGBW, RGBCCT 25A
- for CCT, RGBW, RGB+CCT OR single colour lights
- DALi2, DT8
- max 600W 24V, only 0,5W Idle
- Installed between driver and led
- Input 12-36V from separate driver
- VaLO Zigbee 5 channel LED receiver 12V-36V - for Single colour, CCT, RGBW or RGB+CCT led lights 20A
- for CCT, RGBW OR RGB+CCT lights
- Philips HUE compatible, Zigbee 3.0
- max 480W 24V, only 0,5W Idle
- Installed between driver and led
- Find - Bind, Touchlink, Network
- VaLO — LED receiver with PUSHDIM for 12V-36V led strips and panels CCT/RGB, 20A
- single colour, RGBW and CCT leds
- max 480W 24V, only 0,5W idle!
- installed between led and driver
- Master/Slave for infinite loads
- PUSHDIM support
