Wirelessly controlled led luminaires

Wireless lighting control gives you almost unlimited possibilities to control your luminaires, i.e. switch on, switch off, dim and control the colour or hue of the light. Almost all our luminaires, excluding wall lights, can be controlled wirelessly. Our range includes wireless wall switches and remote controls, as well as wireless systems that work over the home WiFi network and can be controlled by smart devices (phone, tablet).

Wireless control consists of two parts

Wireless control of a daisy chain, panels, plafonds or led list, for example. For each group to be controlled separately, a separate wireless receiver is needed. Depending on the type, the receiver is installed either before or after the transformer. The second part of building a wireless control system is to choose a control button, or other control method, to adjust and operate the lights.

In this category you will find our products that can be controlled wirelessly.

All our products are safe, and at least CE and RoHS standardised. Our products come with a long warranty of 3 or 5 years.

Read more
Sort by
174 product
Filter (0)
Zigbee 3.0 series 4-in-1 Multi Sensor - PIR Motion / Temperature / Humidity / Illuminance
In stock at 23 pcs
Sensor-ZG
  • Four different sensors in one device!
  • Has PIR motion, temperature, humidity and illumination sensors
  • Mounting frame and 2 sided stickers included, fits into Exxact frames as well!
  • Uses two AAA batteries that are included inside the device
  • Zigbee 4-in-1 Multi Sensor
VaLO Zigbee 3.0 Series 4-in-1 Multisensor. With this sensor you can monitor e.g. movement, room temperature, how humid the air is or how bright or dark it is. The Zigbee Azoula Smart app lets you control what happens under certain conditions, such as when a light comes on or an alarm goes off.
€ 59.00 VAT. 24%
VaLO — LED receiver with PUSHDIM for 12V-36V led strips and panels CCT/RGB, 20A
In stock at 16 pcs
VaLO-V1236-20A-PUSH
  • installed between led and driver
  • Master/Slave for infinite loads
  • max 480W 24V, only 0,5W idle!
  • PUSHDIM support
  • single colour, RGBW and CCT leds
VaLO series receiver 12V-36V for led strips and panels (RGB/WRGB/CCT strips). Maximum load 4x5A. Button to be ordered separately. Also PUSHDIM (0V) control.
€ 99.00 VAT. 24%
1m LED RGBW 4000K STRIP NEON, BENDABLE 14,4W/m 24V IP65
In stock at 190 pcs
strip144-24v-RGBW-neon-Ip65-1m
  • 14,4 W/m and 1000 lumen/m
  • connetion cables are sold separately
  • max. 25 meter,RGB, 24V
  • Separate white 4000K
  • sold by meters, can be cut on every 5 cm
NEON RGBW IP65 waterproof LED strip is easy to install, cut and bend into different shapes. The strip can be cut every 10cm. The colours of the light of the NEON bendable strip can be freely adjusted. The strip has its own separate white light (4000K) and has a colour rendering index of over 85 whi...
€ 39.00 VAT. 24%
LED RGB STRIP SMD 5050 PERLY, 7,2W/m (36W/5m) 12V, IP21
In stock at 28 pcs
stripRGB-12V-IP21
  • 12V
  • 30 leds/m, cutmarks every 10 cm
  • 500 lumen/m
  • IP21
  • Only RGB
Helmeile light strip 12V RGB version Note! In the product images so far 14,4 W/m RGBW version!
€ 99.00 VAT. 24%