Be the first to review this product
LED strip WIRE DC-DC DIMMER 12-24V WHITE
Can be used with both 12V and 24V strips. Maximum load for 12V strip is 72W and for 24V strip is 144W (6A). It is recommended to use a dimmable (TRIAC) transformer with the dimmer, as some non-dimmable transformers may produce high-frequency noise during dimming.
Dimmer switch for led strip, WHITE. The perfect solution for LED strip in kitchen cabinets and other applications where there is no separate wall switch for the light, but the light is supplied with continuous electricity. In addition to kitchen task lighting, applications include wardrobes and various night lights, etc. The dimmer also has an internal memory, so it remembers the previous position.
Can be used with both 12V and 24V tapes. Maximum load with 12V tape 72W and with 24V tape 144W (6A). A dimmable (TRIAC) driver is recommended with the dimmer, as some non-dimmable drivers will produce high frequency noise at the half-way point of the dimming.
Installation
Connected between the strip and the driver (i.e. output 12-24V and input 12-24V). 5,5mm DC connectors (Male in - Female out)
Dim
- Short press ON/OFF
- Longer press dims/brightens the tape. So if the tape dims first, releasing the button and pressing and holding it again will make the tape brighter.
Size
Dimensions 10x55mm
Guarantee (year) | 3 years |
---|---|
Watt | 144.00 |
Dimensions | 10x10x55mm |
Product height | 5.5 |
Product width | 1 |
Product depth | 1 |
Voltage (V) | 12, 24 |
Approved | CE, RoHS |
Muuta | Connect the dimmer block between strip and driver. 5.5mm DC connectors |
IP Class | IP20 |
Installation
Plug DC copnnectors between the strip and the driver (12-24V input and 12-24V output). If you cut connectors, you have to solder or use connectors.Use TRIAC dimmable driver if driver makes high pitched noise.