Be the first to review this product
LED strip button DIMMER 12-24V, max. 72W
In stock 71
SKU
solder-button
Dimmer switch for LED strip. Perfect solution for kitchen cabinet LED strip and other locations where there is no separate wall switch for the light but continuous electricity is supplied to the light. Suitable for use in addition to kitchen work lighting, for example, in wardrobes and various night lights.
Installs beautifully in our 2500mm long aluminum profiles. Can be used with both 12V and 24V strips. Maximum load for 12V strip is 96W and for 24V strip is 192W (8A). With the dimmer switch, you do not need a dimmable transformer.
LED strip button DIMMER 12-24V, max. 72W is available to buy in increments of 1
Button dimmer for led strip. The perfect solution for the LED strip in kitchen cabinets and other applications where there is no separate wall switch for the light but the light is powered by a continuous current. In addition to kitchen task lighting, it can also be used for wardrobes and various night lights, etc.
Fits beautifully into our 2500mm long aluminium profiles. Can be used with both 12V and 24V strips. Maximum load with 12V strip 96W and with 24V strip 192W (8A). With the dimmer you do not need a dimmable driver.
Installation
Tin between the tape and the driver (i.e. output 12-24V and input 12-24V).
- Make sure you use a DC driver and not a DC driver. When switching, the power should be off.
- Make sure the plus "+" and minus "-" are connected correctly to the driver. The plus and minus must not be cross-connected, but the plus must be connected to the plus and the minus to the minus.
- Drill a 6mm hole in the cover of the mounting flange and remove the white button by pulling it out.
- insert the profile cover and replace the white button.
- note that the pin is 2mm high for our low profile (cut or grind the black pin lower) and on 16x18mm profiles you should place a cap less than 8mm high
Dimming
- Short press ON/OFF
- Longer press dims/brightens the strip. So if the tape dims first, releasing the button and pressing and holding it again will make the tape brighter.
Size
Dimensions 10x55mm
| Guarantee (year) | 3 years |
|---|---|
| Watt | 192.00 |
| Dimensions | 10x10x55mm |
| Product height | 5.5 |
| Product width | 1 |
| Product depth | 1 |
| Approved | CE, RoHS |
| Muuta | Solder the dimmer block between strip and driver. |
| IP Class | IP20 |
Customer Reviews
Customer Questions
Asennus
Tinataan nauhan ja muuntajan väliin (eli output 12-24V ja input 12-24V).
- Varmista että käytät tasajännite muuntajaa etkä tasavirta muuntajaa. Kolvatessa virran tulee olla pois päältä.
- Varmista että plussa "+" ja miinus "-" on kytketty oikein muuntajaan. Plussaa ja miinusta ei saa kytkeä ristiin vaan plussa plussaan ja miinus miinukseen.
- Poraa asennuspfofiiln kanteen 6mm reikä ja irrota valkoinen nappi vetämällä
- aseta profiilin suojakansi paikoilleen ja valkoinen nappi takaisin.
- huomaa, että nappi on 2mm korkea matalaan profiiliimme (leikkaa tai hio mustaa tappia matalammaksi) ja 16x18mm profiilissa tulee asettaa alle 8mm korkea koroke
