Outdoor led strip lights, water resistant KIT 7,2W/m, 5 meter BASIC

Ambient lighting LED strip light for stairs or outside - base set 5 meters

LED strip set for installation, for example in the kitchen plinth. This 7.2 W/m LED strip is also ideal for use on stairs and handrails, as well as outdoors for lighting outdoor railings, courtyard structures and eaves. Choice of ON/OFF driver (IP65) or TRIAC (IP21) dimmable driver,

Includes

LED strip light kit includes 5 metres of 7.2W/m LED strip (either 3000K warm or 4000K neutral white), suitable power supply. This set also includes two surface-mountable aluminium profiles in silver, white or black (length 2.5m per profile). The profiles come with mounting brackets, plastic cover and two ends per profile).

Led HELMEILE 7,2W/m strip light specifications

The 7,2/m strip has a luminous intensity of 500 lumens per metre, which is a good light output, but for precise work or efficient task lighting you should choose an even more powerful LED strip, e.g. 14,4 W/m or 17 W/m. A special tape on the strip ensures good fixation. The LED strip is coated with a thin, non-yellowing silicone coating and is only 1.8 mm thick, which is very low. Both ends of the strip are equipped with 0,5m long wires with DC connectors.

The strip is silicone protected with a non-yellowing surface, IP65 waterproof, also suitable for damp locations and outdoor use. The ON/OFF driver is waterproof (IP65), but the TRIAC dimmable driver is only IP21, so be sure to protect the connections and place the driver in a dry room or in a moisture-proof box!

Installation tips

The strip should be fixed to a metal, such as the aluminium profile that comes with this kit, to conduct heat away from the LED strip. Proper cooling extends the life of the LED, and protects the strip from dust and dirt. Attach to a clean base. Before fixing to the aluminium, check that the LED strip works. However, do not leave the strip burning on the roll, as it will heat up quickly while on the roll and melt the adhesive surface! If necessary, the silicone-protected strip can be wiped clean with a rag and a diluted washing solution if the plastic cover is not fitted.

With this LED set you can, for example, cast indirect light on top of a cabinet (2x2,5m) or on a plinth or under a cabinet. For example, if you run two 2.5m strips to the same driver, the dc plug ends must be disconnected and connected as wires. We can also supply two-core low-current installation cable in metre lengths for installation.

If you want a shorter cable, please add the desired length in the message field of your order, or send us an email at myynti@ledstore.fi

We also make LED strip assemblies to customer's dimensions ready for installation. Read more about our fast LedPaja service