Kitchen cabinet led strip lighting KIT 17W/m strip (with wireless dimmer)

LED strip kitchen partition set

LED strip set for installation in the kitchen as a work light or on top of cabinets. Also suitable for the utility room! With the wireless dimmer you can easily control the LED strip. NOTE! This is especially suitable for kitchens where the worktops are glossy and mirror the light, so that spotting could be distracting, because this strip is flat!

Includes

The LED strip for Kitchen Cubicle Kit includes 5 meters of 17W/m LED strip (either 3000K, 3500K or 4000K), a suitable power supply, a VaLO series wireless push button (the button can be placed on the wall or kept detached), and a receiver to communicate between the power supply and the strip. The system is dimmable, making it easy to set the mood. This set also includes two surface-mounted aluminium profiles (length 2.5m per profile). The strip is not point-like, but the light comes in a steady stream, as there are a whopping 240 LED circuits per metre in this strip.

About

The luminous intensity of the 17/m strip is 1200 lumens per metre, in other words, it is very efficient. The base colour of the strip is white and the 3M special adhesive tape ensures good adhesion. The LED strip is 3mm thick, which means it is very unobtrusive. With this set you can replace 2 58W fluorescent tubes!

The LED strip can be cut at 25mm intervals and soldered together. The colour rendering index of the BALANCED strip is top class, 97! With this strip, colours are reproduced as they should be.

When dimmed, there may be some buzzing from the driver. If the driver is installed in a cabinet, for example, the buzzing is less likely to be disturbing. However, please bear this in mind when purchasing the product.

Installation

The tape should be bonded to metal, such as an aluminium profile (included in the kit), to allow heat to dissipate away from the LED circuit. Proper cooling will prolong the life of the LED.

With this led set you illuminate for example a 2,5m kitchen partition and install an indirect light on top of the cabinetry (2x2,5m). If you cut the strip and install it in a damp area, be sure to patch the open end with silicone. When you run two strips to the same driver, you cannot use quick connectors, you have to cut the strip and connect it as wires (a basic thing for an electrician). With this setup, both pieces of strip light up at the same time.

For installations longer than 10 meters, a supply from both ends prevents light fading and the tape burns equally brightly the whole way. A single driver can be used for both ends if a thin wire is run alongside the profile. An electrician can do this kind of work.

The receiver is mounted between the LED strip and the power supply. More detailed instructions on how to install the VaLO dimmer are included in the package.

We are also happy to help with any questions you may have about the installation.