Kitchen cabinet led strip lighting KIT 14,4W/m strip (with wireless dimmer)
LED strip set includes 5 meters of 14,4W/m LED strip, a suitable power supply, a VaLO series wireless dimmer and two surface-mounted aluminium profiles (length 2,5m per profile).
LED light ribbon for kitchen set
LED strip light set for installation in the kitchen as a work light or on top of cabinets. Also suitable for the utility room! With the wireless dimmer, you can easily control lamps that only receive electricity from the wall, but do not have their own wall switch (often in old kitchens with switched fluorescent tubes).
Includes
The LED strip light for kitchen set includes 5 metres of 14.4W/m LED strip (either 3000K warm or 4000K neutral white), a suitable power supply, a VaLO series wireless push button (the button can be placed on the wall or kept detached), and a receiver/power supply controlled by the wireless button. The system is dimmable, making it easy to set the mood. This set also includes two surface-mounted aluminium profiles (length 2.5m per profile). A choice of several different profiles.
About
With a luminous intensity of 14,4/m the strip is 1000 lumens per metre or in other words, efficient. The base colour of the strip is white and the 3M special adhesive tape ensures good adhesion. The LED strip is 3mm thick, which is very discreet. With this set you can replace 2 58W fluorescent tubes!
Silicone-protected with a non-yellowing cover, IP65, which means it is also suitable for damp areas and outdoor use!
LED circuit SMD3528 newer model with a colour rendering index (CRI) of over 95.
Installation
The tape should be bonded to metal, such as an aluminium profile (supplied), to allow heat to dissipate away from the LED circuit. Proper cooling will extend the life of the LED.
With this led set you illuminate for example a 2,5m kitchen partition and install an indirect light on top of the cabinetry (2x2,5m). If you cut the strip and install it in a damp area (directly exposed to water), be sure to patch the open end with silicone. When running two strips to the same transformer, you do not need to use quick connectors, but cut them and connect them as wires to the ready connectors on the transformer... With this set, both pieces of strip light up at the same time.
Detailed instructions on how to connect the VaLO chimney are included in the package.
- Delivery status In stock at
- Brand Ledstore
- Breadcrumbs Home Led AreasLED interior lightsLED kitchen lightingLighting for kitchen under kitchen cabinet Kitchen cabinet led strip lighting KIT 14,4W/m strip (with wireless dimmer)
- Category Lighting for kitchen under kitchen cabinet
- SKU STRIP14.4-SET
- Wattage 72
- Lumen 5000
- Guarantee (year) 3 years
- Colour rendering (CRI ±3) 95
- IP class IP21
- Life span 35000
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
- Is the Led strip easy to cut?
- Why do I need an aluminium mounting profile for LED strip?
- Is it true that if I install an LED strip without a profile, its lifetime is easily only 1-2 years?
- How do I make corners on an aluminium profile?
- How to make long installations, up to 5 metres?
- How are the led strips attached?
- Does the led strip have the connecting wires ready?
- What if I split the tape into several parts and some of the parts have no connectors? How do I connect the tapes to the transformer?
- I am installing a led strip under the sink/shower/carport. Do I need an IP65 profile?
- Can I install a profiled led strip under a drying cabinet?
- What is the difference between 12V and 24V led strip?
- What happens if I connect a 12V led strip to a 24V transformer or vice versa?
- I only have old plug-in fluorescent tubes in my kitchen. How can I replace them with LED strip?
- Can I install the led strips myself? Is it electrical work?
- Does this strip accept a PWM dimmer?
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?