Be the first to review this product
Bathroom LED strip light SET (strip 17W/m+wireless dimmer set+driver+profiles)
With this led strip set you'll get a pleasent, high quality light that is dimmable and suitable for wet premises. Led strip installed to a aluminium profile, gives and even light and makes it easier to clean the strip.
Led strip set for bathroom
With this led strip set you'll get a pleasent, high quality light that is dimmable and suitable for wet premises. Led strip installed to a aluminium profile, gives and even light and makes it easier to clean the strip. Recently it has been popular to install the led strip on a ceiling that has been left a bit open from near the wall so, that the led strip is inside the wall and only the light comes out. Mostly this has been used on the wall where the shover heads are, but also symmertical installations have been popular. When istalled near the wall, the led strip makes stuructured tiles and surfaces pop up nicely.
When used as an indirect lighting, note that the colour of the wall that the light is reflected from, as well as is the structure (matt or shiny), will have an effect on the amount of light that will be reflected. For example, if you like cool light but reflect it from a bright, warm orange wall, the space will have a warm orange glow.
Most people select the light colour 4000K for bathrooms, utility rooms and spas, but if you have a lot of warm colours and natural, warm wood, we mostly recommend the light colour 3000K. There is no right or wrong when desideing between 3000K and 4000K and we incourage people to choose the one they like the most. We will help you with all questions on lighting design.
- one 5m led strip with connectors on both ends
- water resistant driver for 5m led strip
- two 2,5m long aluminium profiles (diffuser, end caps and clips included)
- wireless control for the set (1 button and 1 receiver)
|Color temperature (K)||3000, 3500, 4000|
|Guarantee (year)||3 years|
|Colour rendering (CRI ±3)||97|
|Dimensions||6x17mm, set is 5m long, can be easily used as 2x2,5m|
|Approved||CE, RoHS, IP65|
|Muuta||Wireless dimmer set included|
Strip should ALWAYS be installed on aluminium profile for the led strip to cool down properly. Incorrect installation will void warranty.
To pair the receiver (after connections), press [learning key] button and then press the dimmer button that you like to pair with that set. NOTE! Dimmer button has a protective film where the battery is, that needs to be removed before pairing.
If you need help in pairing the button and the receiver, do not hesitate to contact us!