DALI Control Gear
DALI Control gear (ECG)
This category is for DALI Control Gear. We have high quality DALI controllers. All of our products have 5 years quarantee. We have items in stock and you can visit our shop to see products physically.
We have DALI and DALI2 items, DT6 and DT8 protocols supported.
Products include:
DALI Constant Current LED drivers
These DALI and DALI2 drivers are designed to be adjusted to match perfectly you LED needs. You can adjust mA easily with you phone, without power to your LED driver!
Current range is from 100mA to 1500mA and power range is from 10W to 65W.
These mA adjustble drivers are used most commonly with CCT led lights and are DT8 supported.
DALI Constant Voltage LED drivers
Most common DALI2 driver types. Power output range is 50-200W 24V, and they support CCT, RGB and RGBCCT.
In other words, they support DT6, DT8 Tc, DT8 XY, DT8 RGBWA device types
DALI relays / dimmer modules
These DALI relays are usually used to turn ON/OFF any device up to 1000W. Water pump, valve, etc.
Dimmers are usually used for single color LED lighting with TRIAC drivers.
What is ECG?
ECG stands for Electronic Contor Gear, i.e. any device that supplies voltage to lights, etc. So these include DALI transformers and DALI relays. One DALI master can control up to 64 (OUTPUT) ECG devices.
What is DALI?
DALI dimming is a lighting control system that uses a digital protocol to communicate between the lighting controller and the lights themselves. This allows precise control of the brightness and colour of individual lights or groups of lights, as well as the storage and recall of pre-programmed lighting situations. DALI dimming systems typically consist of a DALI controller that sends commands and DALI-compatible lights that can receive and respond to those commands.
DALI works best when it is designed and built from the ground up. This is because it needs two control wires running between the devices.
Key features of DALI
- It's a free protocol! Anyone can use it.
- DALI2 certification requires devices made by different companies to work together. LedStore only uses certified products.
- DALI is fairly easy to implement. You can install the power and control wires side by side, as there is no need to protect them. So 5 wires go everywhere: L, N, ground and 2 control wires (5×1,5 MMJ).
- The wires can be installed any way you like, as long as the wires are within 100 m of the DALI BUS controller. The distance can be even more if repeaters are used. The maximum recommended length of the DALI network is 300 metres.
- Because DALI uses digital signals for communication instead of analog signals, the devices will have the same dimming values. This makes the control groups very functional and accurate.
- The system's addressing system (DALI address) ensures that each device or group can be controlled individually.
- One DALI master can control up to 64 DALI ECD devices.
- One DALI master can control up to 64 DALI ECG devices.
- One DALI master can control up to 16 groups
- One DALI master can control up to 16 scenes