This category is for DALI Control Devices. We have high quality DALI devices. All of our products have 5 years quarantee. We have items in stock and you can visit our shop to see products physically.
We have DALI and DALI2 items, DT6 and DT8 protocols supported. ALL products have DALI/DALI2, CE, RoHS, SELV and many more certificates
Products in this category include:
A DALI master is a control centre or heart that usually also contains the power supply for the DALI bus. The DALI master is the brain of the system that controls all the devices. The master can be programmed and operated in different ways, depending on the master.
USB to the computer and the master is connected and the DALI software is installed on the computer.
IOT version where the master is controlled by a mobile phone/tablet wirelessly on the same Wifi network.
These are button on the wall. DALI bus powered buttons are used to control you DALI lights
These are installed to ceiling or wall for area monitoring. You can use them to turn on/off lights upon occupancy or just dim lights according to light levels (Lux)on the wall. Sensors are DALI bus powered.
What is DALI ECD?
ECD stands for Electronic Contor device, i.e. a device that commands devices such as DALI buttons and DALI sensors. One DALI master can control up to 64 (INPUT) ECD devices.
What is DALI?
DALI dimming is a lighting control system that uses a digital protocol to communicate between the lighting controller and the lights themselves. This allows precise control of the brightness and colour of individual lights or groups of lights, as well as the storage and recall of pre-programmed lighting situations. DALI dimming systems typically consist of a DALI controller that sends commands and DALI-compatible lights that can receive and respond to those commands.
DALI works best when it is designed and built from the ground up. This is because it needs two control wires running between the devices.
Key features of DALI
It's a free protocol! Anyone can use it.
DALI2 certification requires devices made by different companies to work together. LedStore only uses certified products.
DALI is fairly easy to implement. You can install the power and control wires side by side, as there is no need to protect them. So 5 wires go everywhere: L, N, ground and 2 control wires (5×1,5 MMJ).
The wires can be installed any way you like, as long as the wires are within 100 m of the DALI BUS controller. The distance can be even more if repeaters are used. The maximum recommended length of the DALI network is 300 metres.
Because DALI uses digital signals for communication instead of analog signals, the devices will have the same dimming values. This makes the control groups very functional and accurate.
The system's addressing system (DALI address) ensures that each device or group can be controlled individually.
One DALI master can control up to 64 DALI ECD devices.
One DALI master can control up to 64 DALI ECG devices.