Be the first to review this product
1m LED RGBW 4000K STRIP NEON, BENDABLE 14,4W/m 24V IP65
- max. 25 meter,RGBW, 24V
- sold by meters, can be cut on every 5 cm
- 14,4 W/m and 1000 lumen/m
- Separate white 4000K
- connetion cables are sold separately
High quality 24V RGBW led strip NEON!
Waterproof led strip NEON is easy to install, cut and bend. The tape can be cut every 5cm.
This led strip uses four led circuits which enables the change in colours AND there is also dedicated 4000K white led chip.. The CRI around 85 for white. So it shows colours naturally (when in 4000K, the colours are not "tinted" to yellow or blue). The led strip is dimmable with ie. TRIAC driver. Led strip 14,4W/m is equivalent to 120cm fluorocent tube, so you'll even save energy!
Strip is sold by one meter and is provided with endcaps and connectors.
Lighting
The strip can be controlled with VaLO RF or Zigbee -series dimmers (RGB) and receiver (RGB). This product can be seen at our warehouse store.
This strip is mostly used in indirect lighting and for creating different moods outside of in carved sufraces. RGBW led strip has 60 led circuits on a meter. This makes the light even.
Installation
LED strip comes in 25m roll that can be cut to measure in every 10 cm.
If you have more than 10m of strip, you need to feed the power from both ends or to minimize the power loss.
LED strip works in boats, as it is 24VDC you might not even need a driver!
Remember to order a driver (unless it is for a boat, car or with solar power of 24VDC).
Dimming
LedStores CCT strip can be dimmed and adjusted with wireless VaLO RF or Zigbee -series controller and receiver (RGB)his is a perfect solution also in places where you have power for the strip but no wall swich ready. With this system, you just hook the wireless receiver between led strip and driver and have the remote were ever you like.
Create a light of your own
Why would you use led strip only in traditional way (cabinets, indirect light etc.) when you can make a light of almost anything. Old cart wheel, zink bucket or even a wooden boat turns in to a light when you put led strip inside it! Get creative!
Guarantee (year) | 3 years |
---|---|
Colour rendering (CRI ±3) | 85 |
Model | RGBW-strip-24V-Neon |
Lumen | 1,000.00 |
Color | White |
Voltage (V) | 24 |
Color temperature (K) | 4000 |
Light Adjustment | RGBW |
Watt | 14.00 |
Lifespan | 35000 |
Dimensions | 10x21x1000 |
Product height | 100 |
Product width | 1 |
Product depth | 2.1 |
Approved | CE, RoHs, IP65 |
Energy class | B (185lm/W) |
IP Class | IP65 |
For the RGBW ability to work, you need DALi, VaLO RF, VaLO Zigbee or other system to control it.
LED strip can be cut to measure in every 5cm. If you have pieces left, we recommend that you solder the wanted lengths together and glue silicone to keep it waterproof.
If you have more than 10m of strip, you need to feed the power from both ends or from the centre to minimize the powerloss.
LED strip works in boats, as it is 24VDC you might not even need a driver!
Remember to order a driver (unless it is for a boat, car or with solar power of 24VDC).