Be the first to review this product
WANDA Battery Led light 24cm with motion sensor and light sensor
This is a battery-powered LED light. The LED light has a motion sensor and a light sensor/dusk switch. The light has a LI-Ion battery and can be charged with a regular USB charger (5V, 1A) which is likely to be available from several phones. The light comes with a charging cable, but not a wall plug.
The light color is warm 3000K. The light is available in 2 sizes. 240mm (1.5W) and 440mm (3W).
The most commonly charged light is used in wardrobes, pull-out drawers, kitchen cabinets. Also great as a night light on trips. In addition, Wanda is perfect for lighting small spaces such as cottages and sleeping lofts due to its beautiful and even, warm-toned light.
This is a battery powered and magnetic multifunctional LED light. The WANDA light is equipped with a motion sensor and a light sensor/ dimmer switch. It has a LI-Ion battery and can be charged with a standard USB charger (5V, 1A) which you probably have left over from your phone. The lamp comes with a USB-B charging cable, but no wall plug.
The light tone is a warm 3000K. The lamp is available in 240mm (1.5W).
The most common uses for the rechargeable lamp are in wardrobes, drawers, kitchen cupboards, fridges (yes, we tried using it there too and it worked well for over 2 months on a single charge). You can take a bundle of lights with you next time you go to the cottage, where it would be nice to have a little light in a hood or loft. A popular use is also as a night light in the toilet. Just attach under the furniture on the wall, with the light pointing towards the door and you have a night light!
Battery life (on new unit) in motion sensor mode is approx 2-3 months (box opened 3 times a day, 10sec). Fully charged takes 4 hours.
The light has 3 different modes:
- Always on. Always on.
- Use as a flashlight. The light only comes on when it is dim and reacts to movement.
- Only the motion sensor. The light always works when it detects motion. Even in the sun.
- ... and off, of course.
The light is attached to the object with a magnet. The light has a magnetic strip the length of the light, which is fixed in place with a 3M sticker if the light is to be permanently mounted on the object. The sticker on the light is REALLY strong! The light has a counter magnet to attach it to the magnetic strip. This makes it easy to remove the lamp for charging or to take it with you. It can also be carried on a strap of a canvas bag thanks to the magnetic attachment. It also sticks to any magnetic surface, such as a storage shelf or the bonnet of a car.
Installation examples:
In a cupboard: on the back wall, pointing towards the door
In a drawer: To the front or rear edge of the drawer.
In the bathroom: on the back wall under the drawer, facing the door.
In storage: on metal shelves due to magnetism
On a trip: Take along and use like a flashlight. Light is pleasantly even and easy on the eye. Attaches to almost any metal surface (not aluminium) due to its magnetism. The magnet also sticks through fabric, so you can attach it to a bag strap, for example. Hang it on hooks and you have a kitchen table light in your caravan or boat, for example. The hooks are not included.
Dimensions:
240x18mm
Guarantee (year) | 3 years |
---|---|
Colour rendering (CRI ±3) | 85 |
Model | Battery_Led |
Lumen | 200.00 |
Watt | 1.50 |
Lifespan | 35000 |
Dimensions | 240x40x18 |
Product diameter | 4 |
Product height | 24 |
Product width | 1.8 |
Product depth | 1.8 |
Approved | CE, RoHS |
Energy class | B (185lm/W) |
IP Class | IP21 |
Light is connected with magnet to cabinets. Base has 3M STRONG two sided tape to install it materials and light itself is magnetic so it is very easy to grab and re-charge when needed.
Installation examples:
On cabinet, install it to back wall, pointing to door.
On Drawer, install it to drawer ceiling.
Measurements:
240x40x18mm
440x40x18mm
- Mode 1 (always ON): Press the switch about 2sec when its OFF
- Mode 2 (motion and light sensor): Press the switch shortly when its on mode 1 or 3. GREEN led flashes.
- Mode 3 (motion sensor mode): Press the switch shortly when its on mode 2. RED led flashes.
- Mode 4 (OFF) Press the switch about 2sec when its ON
Please note that sensor works direcly in about 110 degrees in front. range is about 2 meters. So it wont see movement from side.