Be the first to review this product
Recessed LED PLAFOND 240 - UPPOAVA, 17W, colour changeable (CCT)
LED ceiling 240 UPPOAVA, IP54, CCT (17W) is a dimmable, color temperature adjustable, and moisture-proof Light with the latest LED technology for all home spaces when you want to change the atmosphere and affect the alertness level. The light is adjustable between 3100K-5700K.
Led plafond 240 UPPOAVA, 17W is a multifunctional light for indoor and outdoor use. It is suitable for bathrooms, terraces and kitchens. The light is dimmable, the light colour is adjustable (2800K-5500K) and it is moisture-proof. The light comes with a 5-year warranty.
About Led technology
It doesn't matter what kind of light the light produces. For the home, we recommend choosing a light with a colour rendering index of at least over 90 CRI for high quality lighting. UPPOAVA -led ceiling lights have a CRI above 95. The colour temperature of the light is adjustable between 3100K (warm white) and 5700K (cool white).
UPPOAVA -led ceilings use an edge diffuser to give a soft, non-pointed light and the matt acrylic diffuses the light evenly. UPPOAVA -plafond, 17W led is equivalent in light output to 75-100W halogen, which is 1300 lumens.
See here for installation examples and ideas
See here for installation examples and ideas
Installation
The light is recessed in the ceiling. When recessed, the mounting hole should be 225mm. The light itself is 240x22mm, mounting springs 2 pcs included. The power supply is included in the package. The light has a switch which can be selected from 2800/4000/5500K. The panel also has a quick connector if you want to extend the wires, and a 3-pole wire for connecting to a driver. For wireless control, we recommend a two-channel RF 50W driver for a group of two plafond. Installation with CCT wiring harness with 3-meter wires and wireless button set.
The light will fit into a typical ceiling structure with only 48x48mm of coloured steel and 13mm plasterboard under the vapour barrier. If the vapour barrier is installed loosely, we recommend installing a board or plasterboard above the light to prevent the insulation from sagging. The LED will not reach high temperatures, so no fire protection is required. However, it is not recommended to mount the Led light on any material and an air space of e.g. 1-2 cm can be left.
NOTE! Requires a separate CCT receiver and a light controller to change the colour of the light continuously.
driver dimming and colour adjustment
The RF driver is available in three sizes. 50W in addition to 100W (max. for five 240, 17W plafond), and 200W (max. for 10 pcs. 240 Plafond 17W).
With the RF driver and the wireless CCT control button, colour adjustment is via the right-hand button and on/off and dimming/brightening is via the left-hand button. No other devices are required.
Another option for using a wired wall dimmer is a non-dimmable driver and a wired wall dimmer. A wiring harness is also required and/or an intermediate wiring harness with a three-pole cable. A wired dimmer can also be selected for the wiring harness, please ask for a quotation.
Third option for large groups of more than 200W / more than 10 units in one group for colour temperature control, a non-dimmable driver can be selected from our wide range of options, as well as a VaLO series CCT/RGB receiver and push button. The button allows the colour of the light from the light to be changed between 3100K and 5700K. In addition, the light can be dimmed with the same button. There are two push-button options. In the rotary CCT dimmer, I move between dimming and colour adjustment by double-clicking the knob on the rotary button. In the two-button model, control as described above.
We advise on design and installation.
Why choose the UPPOAVA 240-led panel?
- Dimmable
- Light colour is adjustable
- Moisture-proof (IP54)
- Excellent colour rendering (CRI 95)
- Good light output
- Superior 5 year warranty for LED light + 3 years for power supply
- UPPOAVA light lifetime up to 50000
- Saves energy and therefore money
- You can use the same light both indoors and outdoors
- Finished, timeless design
- Led plafond 240 is easy to install
Guarantee (year) | 5 years |
---|---|
Colour rendering (CRI ±3) | 95 |
Lumen | 1,300.00 |
Light angle | 110 |
Color | White |
Voltage (V) | 24, 230 |
Color temperature (K) | 3000, 3500, 4000, 5500 |
Light Adjustment | CCT |
Adjustability | Not adjustable |
Watt | 17.00 |
Lifespan | 50000 |
Dimensions | 240x22 |
Installation hole | 225.00 |
Product diameter | 24 |
Product height | 24 |
Product width | 24 |
Product depth | 2.2 |
Approved | CE, RoHS, IP54 |
Energy class | B (185lm/W) |
Muuta | Control panel to be ordered separately. Mounting springs attached. |
IP Class | IP54 |
Chainable | Yes |
Mounting Method | Recessed |
Basic UPPOAVA LED plafond 240 is a recessed light. Installation hole should be 225mm. Driver size is 125x45x33mm and it can be placed maximum of 5m from the light. LED PANEL is 13mm thick, so it fits to most of the ceiling structures (basic plaster board is similar in thickness). We recommend that you install a plaster board on top of the PANEL if the steam lock has been installed loosely. The LED PANEL needs 10-20mm air space on top of the light.You don't need any protection cups etc. when using led lights as the temperature of the light never exeeds 80 Celsius.
If you need surface mounted light, you just order a frame with this light. The driver fits inside the frame. It's also possible to order the light as a suspended model with cable length of approx. 1,5m.
The reason we have desided to have the driver separatre from the body is that this way the driver does not add up to the lights heath load and this makes the light last longer. The driver is included and has a quick connector for easy installation.
UPPOAVA LED plafond 240 can be used with house automatics (ie. KNX and Talomatti).