Be the first to review this product
Recessed LED PLAFOND 200 - UPPOAVA, 15W, colour changeable (CCT)
LED ceiling 200 ADJUSTABLE, IP54, CCT (15W) is a dimmable, color temperature adjustable, and moisture-proof Light with the latest LED technology for all home spaces when you want to change the atmosphere and affect the alertness level. The light can be adjusted between 2800K-5500K.
Led plafond 200 UPPOAVA, 15W is a multifunctional light for indoor and outdoor use. It is suitable for bathrooms, terraces and kitchens. The light is dimmable, the light colour is adjustable (2800K-5500K) and it is moisture-proof. The light comes with a 5-year warranty.
About Led technology
It doesn't matter what kind of light the light produces. For the home, we recommend choosing a light with a colour rendering index of at least over 90 CRI for high quality lighting. UPPOAVA -led ceiling lights have a CRI above 95. The colour temperature of the light is adjustable between 2800K (warm white) and 5500K (cool white) when using a CCT controlled driver or CCT resistor. With a basic driver, the light colour temperature is selectable via a switch; warm white - neutral white - cold white.
UPPOAVA -led plafonds use an edge diffuser, so the light is soft without being pinpointed and the matt acrylic diffuses the light evenly. UPPOAVA -plafond, 15W led is equivalent in light output to 75-100W halogen, which is 1200 lumens.
See here for installation examples and ideas
See here for installation examples and ideas
Installation
The light is recessed in the ceiling. When recessed the mounting hole should be 185mm. The light itself is 200x22mm, mounting springs 2 pcs included. The basic driver is included in the package. With the base driver, the light tone is selectable by switch: warm-neutral-cold. The panel, ordered without driver, has a quick connector if you want to extend the wires, and a 3-pole wire to connect to the driver. For stepless colour temperature control, please take the lights without driver and order a CCT adjustable driver of the appropriate size for the group of lights, as well as a control button. For wireless control, we recommend a two-channel RF 50W driver for a group of three plafond lights. Installation with a CCT wiring harness with 3-meter wires and a wireless push-button set.
The light will fit in a typical ceiling structure with only 48x48mm of coloured steel and 13mm plasterboard under the vapour barrier. If the vapour barrier is installed loosely, we recommend installing a board or plasterboard above the light to prevent the insulation from sagging. The LED will not reach high temperatures, so no fire protection is required. However, it is not recommended to mount the LED light on any material and an air space of e.g. 1-2 cm can be left.
NOTE! Requires a separate CCT receiver and light controller to change the colour of the light. The light can be connected to e.g. DALI (DT8), ZigBee or RF system.
driver dimming and colour control with RF buttons
The RF driver is available in several sizes. 50W in addition to 100W (max. for six 200, 15W plafond), and 200W (max. for 12 pcs. 200 Plafond 15W).
With the RF driver and the wireless CCT control button, colour control is via the right-hand button and on/off and dimming/brightening is via the left-hand button. No other devices are required.
Another option for using a wired wall dimmer is a non-dimmable driver and a wired wall dimmer. A wiring harness is also required and/or an intermediate wiring harness with a three-pole cable. A wired dimmer can also be selected for the wiring harness, please ask for a quotation.
Third option for large groups of more than 200W / more than 12 units in one group for colour temperature control, a non-dimmable driver can be selected from our wide range of options, as well as a VaLO series CCT/RGB receiver and push button. The button allows the colour of the light from the light to be changed between 2800K and 6500K. In addition, 5 lights can be dimmed with the same button. There are two push-button options. In the rotary CCT dimmer, I move between dimming and colour adjustment by double-clicking the knob on the rotary push-button. In the two-button model, control as described above.
We advise on design and installation.
Why choose a UPPOAVA -led panel?
- Dimmable
- Light colour is adjustable
- Moisture-proof (IP54)
- Excellent colour rendering (CRI 95)
- Good light output
- Superior 5 year warranty for LED light + 3 years for power supply
- UPPOAVA light lifetime up to 50000
- Saves energy and therefore money
- You can use the same light both indoors and outdoors
- Finished, timeless design
- Led plafond 200 is easy to install
Guarantee (year) | 5 years |
---|---|
Colour rendering (CRI ±3) | 95 |
Lumen | 1,300.00 |
Light angle | 110 |
Color | White |
Voltage (V) | 24 |
Color temperature (K) | 2700, 3000, 3500, 4000, 5500 |
Light Adjustment | CCT |
Watt | 15.00 |
Lifespan | 50000 |
Dimensions | 200x22 |
Installation hole | 185.00 |
Product diameter | 20 |
Product height | 20 |
Product width | 20 |
Product depth | 2.2 |
Approved | CE, RoHS, IP54 |
Energy class | B (185lm/W) |
Muuta | Control panel to be ordered separately. Mounting springs attached. |
IP Class | IP54 |
Chainable | Yes |
Mounting Method | Recessed |
Basic UPPOAVA LED plafond 200 is a recessed light. Installation hole should be 185mm. Driver size is 125x45x33mm and it can be placed maximum of 5m from the light. LED PANEL is 13mm thick, so it fits to most of the ceiling structures (basic plaster board is similar in thickness). We recommend that you install a plaster board on top of the PANEL if the steam lock has been installed loosely. The LED PANEL needs 10-20mm air space on top of the light.You don't need any protection cups etc. when using led lights as the temperature of the light never exeeds 80 Celsius.
The reason we have desided to have the driver separatre from the body is that this way the driver does not add up to the lights heath load and this makes the light last longer. The the basic driver is included and has a quick connector for easy installation as well as colour selection switch. Order without the driver if you are planning on controlling the colour temperature continously between warm and cold and get a right size driver for the group (24V)
UPPOAVA LED plafond 200 can be used with house automatics (ie. KNX and Talomatti).