Be the first to review this product
Recessed LED PANEL 200 - UPPOAVA, 15W, colour changeable (CCT)
Led panel UPPOAVA 15W is a versatile Light for indoor and outdoor use in homes. It is suitable for use in the bathroom, on the terrace, and in the kitchen, for example. The Light is dimmable, the light color is adjustable (3150-5600K), and it is moisture-proof. The Light has a 5-year warranty.
Led panel UPPOAVA 15W is a multifunctional light for indoor and outdoor use. It is suitable for bathrooms, terraces and kitchens. The light is dimmable, the light colour is adjustable (3150-5600K) and it is moisture-proof. The light comes with a 5-year guarantee.
About Led technology
It doesn't matter what kind of light the light produces. For the home, we recommend choosing a light with a colour rendering index of at least over 90 CRI for high quality lighting. UPPOAVA -led panels have a CRI above 95. The colour temperature of the light is adjustable between 3150K (warm white) and 5600K (cool white).
UPPOAVA -led panels use an edge diffuser to give a soft, non-pointed light and the matt acrylic diffuses the light evenly. UPPOAVA panel, 15W led is equivalent in luminous intensity to 75W halogen, which is 1300 lumens.
Click here for installation examples and photos of ideas
Installation
The light is recessed in the ceiling. When recessed the mounting hole should be 185x185mm. The light itself is 200x200mm, mounting springs 2 included. and a dimmable driver with 3 position switch (3000/4000/5500K) to select the light tone.
If stepless CCT adjustment is desired, the dedicated driver is removed and a group power supply is ordered separately. The panel has a quick connector if wiring is to be extended, and a 3-pole lead for connection to the driver. For wireless control, we recommend a two-channel RF 50W driver for a group of three panels. Installation with CCT wiring harness with 3-meter wires and wireless button set.
The light will fit into a typical ceiling structure with only 48x48mm of cladding and 13mm plasterboard under the vapour barrier. If the vapour barrier is installed loosely, we recommend installing a board or plasterboard above the light to prevent the insulation from sagging. The LED will not reach high temperatures, so no fire protection is required. However, it is not recommended to mount the LED light on any material and an air space of e.g. 1-2 cm can be left.
NOTE! Requires a separate CCT receiver/driver and a light controller in order to change the colour of the light continuously.
driver dimming and colour adjustment
Zigbee or RF driver available in five sizes. 30W, 50W ,75W, 100W and 200W (max. 6 x 200, 15W for panel), and 200W (max. 12 x 200, 15W for panel).
With a Zigbee or RF driver and a wireless CCT control button, colour control is via the right-hand button on the button and on/off and dimming/brightening is via the left-hand button. No other devices are required.
Another option for using a wired wall dimmer is a non-dimmable driver and a wired wall dimmer. A wiring harness is also required and/or an intermediate wiring harness with a three-pole cable. A wired dimmer can also be selected for the wiring harness, please ask for a quotation.
Third option for large groups of more than 200W / more than 12 units in one group for colour temperature control, a non-dimmable driver can be selected from our wide range of options, as well as a VaLO series CCT/RGB receiver and push button. The button allows the colour of the light's light to be changed between 3150K and 5600K. In addition, the light can be dimmed with the same button. There are two push-button options. In the rotary CCT dimmer, I move between dimming and colour adjustment by double-clicking the knob on the rotary button. In the two-button model, control as described above.
We advise on design and installation.
Why choose a UPPOAVA -led panel?
- Dimmable
- Light colour is adjustable
- Moisture-proof (IP54)
- Excellent colour rendering (CRI 95)
- Good light output
- Superior 5 year warranty for LED light + 3 years for power supply
- UPPOAVA light lifetime up to 50000
- Saves energy and therefore money
- You can use the same light both indoors and outdoors
- Finished, timeless design
- The Led Panel 200 is easy to install
Guarantee (year) | 5 years |
---|---|
Colour rendering (CRI ±3) | 95 |
Lumen | 1,000.00 |
Light angle | 110 |
Color | White |
Voltage (V) | 24 |
Color temperature (K) | 2700, 3000, 3500, 4000, 5500 |
Light Adjustment | CCT |
Adjustability | Not adjustable |
Watt | 15.00 |
Lifespan | 50000 |
Dimensions | 200x200mm |
Installation hole | 185.00 |
Product diameter | 20 |
Product height | 20 |
Product width | 20 |
Product depth | 2.2 |
Approved | CE, RoHS, IP54 |
Energy class | B (185lm/W) |
Muuta | Control panel to be ordered separately. Mounting springs attached. |
IP Class | IP54 |
Chainable | Yes |
Mounting Method | Recessed |
Basic UPPOAVA LED PANEL 200 is a recessed light. Installation hole should be 185x185mm. Driver size is 120x45x33mm and it can be placed maximum of 5m from the light. The driver comes with every PANEL 200 light. LED PANEL is 13mm thick, so it fits to most of the ceiling structures (basic plaster board is similar in thickness). We recommend that you install a plaster board on top of the PANEL if the steam lock has been installed loosely. The LED PANEL needs 10-20mm air space on top of the light.You don't need any protection cups etc. when using led lights as the temperature of the light never exceeds 80 celsius.