Be the first to review this product
LED strip DOOR switch 12-24V, max. 192W
In stock 99
SKU
solder-DOOR
DOOR switch for led strip. The perfect solution for lighting up inside cabinets and wardrobes. The DOOR sensor switches on the lights when obstacle is removed from sensor detection range 1-10cm. Light switchs OFF when obstable is back, such as door.PIR switch for LED strip. Perfect solution for lighting up the hallway, entrance and wardrobe. PIR sensor turns on the lights when it detects motion within 2m radius from the sensor. Delay adjustment between 6-70 seconds from the last movement.
LED strip DOOR switch 12-24V, max. 192W is available to buy in increments of 1
DOOR switch for led strip. The perfect solution for lighting up inside cabinets and wardrobes. The DOOR sensor switches on the lights when obstacle is removed from sensor detection range 1-10cm. Light switchs OFF when obstable is back, such as door.
Mounts beautifully inside our 16x18mm white aluminium profile. Can be used with both 12V and 24V strips. Maximum load with 12V strip is 96W and with 24V strip 192W (8A), but we recommend to calculate 10% clearance (i.e. 12V max. 87W and 24V max. 174,5W).
Installation
Tin between the strip and the driver (i.e. output 12-24V and input 12-24V).
- Make sure you use a DC driver and not a DC driver. When switching, the power should be off.
- Make sure the plus "+" and minus "-" are connected correctly to the driver. The plus and minus must not be cross-connected, but the plus must be connected to the plus and the minus to the minus.
- Solder Led strip to end that has sensonr and input voltage to opposite end.
- Measure distance from end of profile 40mm to drill 8mm hole to profile for DORO sensor
- The DOOR sensor is mounted through the profile side.
Use of the DOOR switch
- Kabinets with door
- Drawers
- Sliding door kabinets
Size
Pendulum switch dimensions 10x51 mm plus connecting wires at both ends.
| Guarantee (year) | 3 years |
|---|---|
| Model | SOLDER-DOOR |
| Voltage (V) | 12, 24 |
| Watt | 192.00 |
| Dimensions | 10x55mm |
| Product height | 5.5 |
| Product width | 1 |
| Approved | CE, RoHS |
| Muuta | Solder the switch block between strip and driver. |
| IP Class | IP21 |
Customer Reviews
Customer Questions
N/A