Be the first to review this product
LED outdoor wall light fixture — CUBIC OUT, water resistant IP55, one direction, 3W, 3000K
LED wall light for outdoor use - CUBIC OUT provides downward light, making the Light suitable for ordinary objects as well as for use above doors and in locations where there is a window above the installation site where light is not desired.
LED wall lamp for outdoor use - CUBIC OUT
LED wall light for outdoor use - CUBIC OUT has a simple and modern design. CUBIC emits light downwards, which makes it suitable not only for normal applications but also for use above doors and where there is a window above where the light is installed and where no light is desired.
The light is 100mm deep with 100x100mm sides. The surface of the light resembles sandblasted metal but is weatherproof, powder coated and grey in colour.
The light is equipped with 3pcs 1W Creen power leds. The leds are perfect for Finnish weather, because the led likes cold (in cold weather the led burns brighter and lasts longer). The wall CUBIC has a light output equivalent to about 15W halogen, which means a light output of about 200 lumens. The colour of the light is the familiar shade of halogen, 3000K, which is a warm white light.
See here for installation examples and ideas
The power supply is located in the body and the light only needs to be supplied with 230V normally. Installation is easy. The back plate of the light is first fixed to the wall, then the wires are connected, after which the light is placed on the back plate and fixed in place with two screws. Installation instructions are included in the package.
The same series is also available in pillar light models; one-way, and two-way in two different sizes, short and long. In addition, there is the wall light model CUBIC 2 out, which gives light in two directions.
Protection class IP55. Our lights are RoHS and Ce approved.
The light can be seen in our warehouse.
|Colour rendering (CRI ±3)
|Color temperature (K)
|CE, RoHS, IP55
Driver in inside the body, so installation like any other light. First attach the pack disk on the wall, then connect wires and lastly install the light tto the back disk. Installation manual and all this needed come with the light.