LED downlight —EYE, CCT 2700-4000-5800K,dimmable, 24W, high CRI

The LED EYE light is a dimmable deep-beam light to replace the old PL lamps. The light's elegant reflector (40 degrees) is eye-friendly (unless you stare directly at it!) and when you take a step back, the light is invisible from 1m away. The light produces a generous amount of light and has a range of 7-8m, making it a great choice for high spaces. The light is CCT adjustable and we use a very high quality LED circuit to produce almost full spectrum light, with a CRI of high 95!

Installation examples:

• normal room height 2600-3500mm, 4pcs is enough to light up the space nicely.
• High living room, one light per 3-4 square metres
• Replace in offices, schools, etc. old 2x18W PL lamps
• High outdoor spaces, garages and canopies,..

LED EYE is suitable for general lighting from private homes to public spaces. LED EYE is equivalent in luminous intensity to at least 100W halogen, +2000 Lumen.

The light has an adjustable light temperature of 2700-4000-5800K with a switch, so you can choose the right colour for your interior. Even change according to the seasons! If you want to adjust the light wirelessly without a ladder, you need a 36V group driver, a VaLO controller and a wireless button.

The light is IP44 and the driver is IP21.

LED EYE is a flush mount light in cast aluminium (0,85KG!) with the LED circuitry mounted directly on the body. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature and the high quality LED circuit guarantees a long lifetime of 50,000h and we grant a 5 year warranty on the lamps we manufacture!

See installation examples and ideas here

Installation

The space required for the light is 90mm in height. The diameter of the mounting hole is 150mm.Strong springs hold it in the 3cm thick material at all times.

Each light is supplied with its own power supply, which fits through the mounting hole into the mounting space. By moving the power supply away from the light, we prevent the power supply from heating up the light, and we can keep the size of the light small. There is a quick connector between the light and the power supply to facilitate installation. The colour temperature of the light is changed by means of a switch on the power supply. The light must be switched off before changing the colour, otherwise the light will be damaged.

Dimming and infinitely variable temperature control

The light can be dimmed with a wireless dimmer or TRIAC dimmers, PRIMARY side and they also work with home automation such as KNX. Suitable dimmers can also be ordered from us, "Led dimmers"

They work well for example:

• ABB (former Ensto) Jussi 6523U
• Schneider (ex strГ¶mfors) transistor controller 315W/VA(EXXACT)!
• VaLO Triac dimmer with remote control option

If the preset three colour temperatures are not enough and you want to change the temperature steplessly in addition to dimming, it can be done. The lamp itself uses 36V voltage and if you want to control the spots freely, you need a 36V driver, a wireless receiver and a wireless button or app. The lights are mounted in parallel.

These control devices are available in VaLO RF or VaLO Zigbee versions.

All our lights are CE and RoHS approved.