Be the first to review this product
LED STRIP SMD 2835, 14.4W/m (72W/5m) 24V, IP21, high CRI90, 3000K
Helmeile 14.4W/m LED strip (24V) is excellent for illuminating kitchen countertops and indirect lighting. The LED strip is dimmable and suitable for indoor use (IP21). The light output is 1000 lumens per meter. Comes in a 5m roll.
If you need a custom-sized LED strip or a custom profile with your own measurements, try our custom order calculator!
With the calculator, you can calculate the price for different needs with wireless control or ON/OFF use. For one or multiple levels!
https://ledstore.fi/mittatilaus
LED light strip - HELMEILE
Our Helmeile strip has a luminous intensity of 14.4W/m and 120 LED circuits per metre. This makes the light uniform enough for indirect lighting and countertop lighting, for example. When mounted on an aluminium profile, there is only a slight spotting effect. When indirectly illuminated through a wall, the light is uniform. The CRI of the strip is over 90, which is excellent and suitable for use in home lighting. This LED strip light 24V version is more resistant to long feeds, without light loss.
If you want a special sized led strip or a custom made profile with your own dimensions try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/mittatilaus
About
In the Helmeile strip light we use MD 2835 led circuitry with a colour rendering index of over 90. This led strip is dimmable and suitable for indoor use. Our LED strip is easy to fix with the 3M very strong adhesive tape.This LED strip 14,4W/m is equivalent to the light output of almost 120cm fluorescent tube, so you will save a lot of electricity!
The LED strip is available in two different light colours. The halogen equivalent 3000K and the slightly more modern neutral white 4000K.
Installation
In addition to the LED strip, a power supply and an aluminium profile are required for installation, as well as operating switches.
The LED strip comes in a 5m roll and can be cut to size in 5cm increments. The tape has clear markings to make cutting easier. We recommend soldering the strips together, as we have found that the quick connectors loosen over time and loosening causes the lights to flash. Both ends of the tape have pre-soldered connectors that can be used depending on the destination.
We recommend powering from both ends if there is more than 10m of continuous strip, this prevents light loss and gives an equally bright light from both ends. The Led strip should always be attached to an aluminium strip to allow excess heat to be conducted away from the LED circuitry. This extends the life of the LED strip and keeps the warranty valid. Aluminium profiles can be ordered from our online shop, where they are available in several different types.
LED strip 24V works well with solar power and boats that use 24VDC, then a separate power supply is not needed. In other cases, order a suitable 24V power supply for the strip (e.g. 5m 14,4W is 72W in total, so any 24V power supply above 80W will work).
Connecting plugless drivers is electrical work and requires adequate qualifications. We are happy to help with any installation questions.
Dim
To dim your LED strip, you can use either a traditional rotary wired dimmer or our VaLO RF series wireless dimmer. When using a conventional rotary dimmer, the driver of the LED strip must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the light, but the light is powered by a constant current.
In the case of a smart home, a Zigbee driver and controllers for wireless control are chosen. In Zigbee drivers, the receiver is already built-in.
With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.
Create your own light
Why use an LED strip only for traditional applications when you can make a light from almost anything? Create your own wall light by bending the LED strip and the aluminium profile into the shape you want, or by fixing the LED strip to another heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make LED strip made to measure at LedStore's LedShop.
Guarantee (year) | 3 years |
---|---|
Colour rendering (CRI ±3) | 90 |
Model | STRIP144 - 24V IP21 |
Lumen | 5,000.00 |
Voltage (V) | 24 |
Color temperature (K) | 3000 |
Watt | 14.00 |
Lifespan | 35000 |
Dimensions | 11x2x5000mm (roll) |
Product height | 500 |
Product width | 1 |
Product depth | 2.2 |
Approved | CE, RoHS, IP21 |
Energy class | B (185lm/W) |
Muuta | 3M tape on backside |
IP Class | IP21 |
Strip should ALWAYS be installed on aluminium profile for the led strip to cool down properly. Incorrect installation will void warranty.