Ceiling/wall Mount Zigbee PIR sensor + Light Sensor

This Zigbee motion detector (PIR) can be used to turn on lights indoors. It works best in spaces where most of the time it is only heated, such as wardrobes, air cupboards, storage rooms, technical rooms and pantries. Installation preferably on the ceiling, but wall installation is also possible. The PIR sensor turns on the lights when it detects movement in the area of ​​the beam and turns off the lights after a certain time after the last detected movement. The on time can be adjusted between 0 seconds and 18 hours.

Motion detection is done with infrared, which works so that when the sensor detects a different temperature (heat) from the background in the area of ​​the beam, it turns on the lights. We do not recommend installation near an air conditioner, air heat pump or radiator, because the temperature variation against the other background causes the lights to turn on.

The motion sensor also includes a twilight sensor, which allows it to be used well in traffic lights and night lighting, where it turns on the lights from the movement only when the twilight level is at a certain degree. So, for example, that certain lights turn on when motion is detected, but only in low light. The light level can be adjusted from a dark 0lx level up to a bright 1000lx.

• Detection radius: 130°
• Power: 12/24 VDC
• Identification distance: max. 4m
• Installation height: 2.5m - 4m, recommended installation height 2.5m
• Installation hole: 73mm
• Installation depth: 24mm
• Operating temperature: 0° to +40°
• Time delay: min. 0 seconds, max. 18 hours (adjustable)
• Environmental light level: 0-1000lx (adjustable)
• Protection class: IP20
• Energy consumption: 0.5W
• Humidity where it works: <95%RH
• Motion detection speed: 0.6 - 1.5m/s