Led panels and led ceilings
Led transformers
Led light kits
Led light
Zigbee Wireless control
Led tubes
Glossary
CCT lighting
Led ribbon
Led strip mounting profiles
VaLO RF Wireless control
Led spotlight
Led wall lights
The LED fluorescent tube uses LED technology, which enables lower power consumption and higher light output. Led fluorescent tubes also save energy compared to conventional fluorescent tubes.
a 58w fluorescent tube provides about 3800 lumens of light output, while a 30W LED tube of the same size provides about 4500 lumens.
Yes, LED fluorescent tubes work without an igniter.
A Led tube can replace an old fluorescent tube if it is the same size. When installing the Led tube, it is important to ensure that it is correctly installed and that the correct and appropriate igniter is used.
A roughly equivalent LED tube produces the same light with half the wattage (power consumption)
Led lighting offers better light output and energy savings compared to fluorescent lighting. Led lighting also has lower electricity consumption and a longer lifetime.
To replace the fluorescent tube with LED lighting, you must first remove the old fluorescent tube and install the LED tube. Then you have to install the LED igniter if it is a retrofit tube. In single end tubes you will need to remove the elecronics and the supply will only come from one end of the body. This has significant advantages in terms of consumption and lifetime.
a 58w fluorescent tube provides about 3800 lumens of light output, while a 30W LED tube of the same size provides about 4500 lumens.
You can replace your old fluorescent tubes with LED lighting if the LED tube is of the same size. When installing an LED tube, it is important to ensure that it is correctly installed and that the correct and appropriate igniter is used.
Yes, an LED fluorescent tube can be a direct replacement for a normal fluorescent tube if it is the same size and a retrofit LED tube is used.
You can replace your old fluorescent tubes with LED lighting, by removing the old fluorescent tube and installing an LED tube. You then need to install the led switch and set the switches.
Yes, LED fluorescent tubes work without an igniter.
a 58w fluorescent tube will produce around 3800 lumens of light output, while a 30W LED tube will provide around 4500 lumens of light output.
You can replace your old fluorescent tubes with LED tubes, if the LED tube is of the same size. When installing an LED tube, it is important to ensure that it is correctly installed and that the correct and appropriate igniter is used.
Led tubes have about 80-90% lower power consumption compared to fluorescent tubes when chokes are taken into account. If the chokes are left in place, just replacing the LED tube will usually save 50-60%.
Led lighting has lower electricity consumption compared to fluorescent lighting. Led lighting has about 80-90% lower power consumption compared to fluorescent lighting when chokes are taken into account. Just replacing the LED tube usually results in savings of 50-60% if the chokes are left in place.
In the case of a retrofit tube, to replace the old fluorescent tube with an LED tube, you must first remove the old fluorescent tube and install the new LED tube. Then you have to install the led fuse . For single end tubes, the elecronics should be removed and the supply should only come from one end of the body. This has significant advantages in terms of consumption and lifetime.
the 1200mm20W led fluorescent tube from LedStore provides around 2500 lumens of light output, while a fluorescent tube of the same size provides around 3000 lumens of light output when new.
The Retrofit led fluorescent tube is designed to facilitate the replacement of fluorescent tubes with led lighting. It can be installed directly in place of an old fluorescent tube, eliminating the need for a separate igniter and the need to remove the choke.