Led panels and led ceilings
Led transformers
Led light kits
Led light
Zigbee Wireless control
Led tubes
Glossary
CCT lighting
Led ribbon
Led strip mounting profiles
VaLO RF Wireless control
Led spotlight
Led wall lights
Is it possible to remove lamps from a light set if there are too many of them? ❯
Yes and no..
the 097 directional and 102 fixed series CANNOT be removed in general because the current will be incorrect. The 3-4, 5-6 and 7-8 series use the same transformer. So, for example, you can remove one bulb from a series of 8.
And if you remove that one bulb from a series, you have to replace it with a jumper wire.
From the sauna and terrace series you can remove the LED lamps freely because they work on DC 24V.
What happens if I disconnect the bulb? ❯
097 for the directional series and 102 for the fixed series, if you remove the bulb, the lights will go out because the lamps are mounted in the distributor that comes with the series.So by removing one bulb, the electricity can no longer pass on to the next lamp.
In the sauna and patio sets, you can remove the LED lamps freely as they are connected in parallel and removing one will not affect the others.
The intermediate wires are too short, can I extend them? ❯
Yes you can, but be careful not to get your pluses and minuses mixed up.
We also have 3 m extension cables ready for you.
097/102 series intermediate cable
terrace and sauna series spacer cable
NOTE! 097 and 102 are in the SERIES and the Terrace and Sauna series are in the SIDE.
097 of the directional series and 102 of the fixed series have a white divider support. Can I remove it and just put the wires in one bundle? ❯
NO!! These led sets are connected in series and do NOT work when connected in parallel!