24V LED strip light DRIVER 75W, IP67, Mean Well
In stock at 16 pcs
SKU#: 24V-75W-driver-MW-IP67
0 / 5 (0)
High quality Mean Well power supply for 24V led strip light, with 75W (3,125A) load capacity. The power supply can be dimmed from one side or the other with wireless dimmers.
Read more
€ 75.00
VAT 0% | 24%
Add a comment to the order
Delivery methods
Free shipping for orders over to %s
Payment Methods
Pay safely with Credit/Debit Cards, Paypal and others.
Easy returns
Right of return for 14 days
Very high quality Mean Well power supply 24V for led strip lights or other devices. Capable of withstanding a 75W (3,125A) load. The power supply has a single output, which can be branched to multiple strips if required. The power supply has about 30cm wires at both ends. The power supply can be dimmed from one side with wireless dimmers, such as a 12V/24V wireless dimmer.
You can connect to this power supply in total:
- max.9,3m LIGHT 7,2W/m led strip
- max.4,7m HELMEILE 14,4W/m led strip
- max.4m 17W/m led strip
Dimensions
- Length: 215mm (frame only 180mm)
- Width: 63mm
- Height: 36mm
- Weight: 0.8kg
Protection and more:
Short circuit, overload, overvoltage and overheat protection. Exceptionally wide operating temperature range from -40 to +85 degrees Celsius in free space. Five-year warranty. The transformer is waterproof, making it suitable for outdoor use, IP67. Efficiency 89% and no load consumption 0.5W.
No plug, no LED strip connector/DC plug.
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home LED accessoriesLED strip driver 24V LED strip light DRIVER 75W, IP67, Mean Well
- Category LED strip driver
- SKU 24V-75W-driver-MW-IP67
- 75
- Life span 50000
- 24V driver 75W IP67 Mean Well
- 180x63x35mm
- 24
- 4.5
- 8.5
- SAA, CE,TUV and others. Complite list in pictures.
New product review
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
Customer questions
- How long is the connecting wire between the 12V or 24V transformer and the luminaire?
- Where to place the transformer?
- How to calculate the transformer size? What does 100W mean in practice?
- Can I install several different led strips on the same transformer?
- What is the difference between a 12V and a 24V transformer?
- What happens if I put a 12V led strip into a 24V transformer or vice versa?
- How long can I put a 12 or 24V transformer before the lamp?
- What is an ampere? Watt? Power?
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?