VaLO — LED TRIAC Dimmer and Zigbee receiver for 230V led lights, max.150W
VaLO Zigbee series TRIAC dimmer and receiver for 230V installation, for dimmable LED luminaires, max. 150 W group. With this dimmer you can dim all our TRIAC dimmable luminaires, such as led spots, led panels and TRIAC power supplies (for led strips). The dimmer also includes a wireless Zigbee receiver, which allows you to control the dimmer wirelessly, e.g. with a wireless VaLO Zigbee button or a WIFI-RF hub and Android/iOS device.
Works with a single phase, no need to reset!
The dimmer has a white bezel. The centre also fits directly on all 55 mm frame series, including EXXACT or INTRO/JUNG.
- Find n Bind, Touchlink, Network
- max 150W, no need to reset!
- Phlilips HUE compatible, Zigbee 3.0
- remote control
- TRIAC dimming, Internal memory
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home Lighting controlZigbee wireless systemVaLO Zigbee 230V receivers VaLO — LED TRIAC Dimmer and Zigbee receiver for 230V led lights, max.150W
- Category VaLO Zigbee 230V receivers
- SKU Valo-TRIAC-ZG-150W
- Direction Yhteen suuntaan
- Change 230V
- Size 80x80x53mm
- Wattage 150
- IP class IP21
- Colour White
- Guarantee (year) 5 years
- Approval CE, RoHS
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
- Moi. How close to other transmitters can transmitters be placed. For example in a warehouse on the same disk tray next to each other? Which placement do you recommend?
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?