VaLO — LED receiver for 230V led lights, max.100W
In stock at 17 pcs
SKU#: VaLO-V230-100
5 / 5 (2)
VaLO series receiver for 230V led luminaires. Easy dimming for led spots and led panels. Maximum load 100W. Button to be ordered separately.
Read more
€ 39.00
VAT 0% | 24%
Add a comment to the order
Delivery methods
Free shipping for orders over to %s
Payment Methods
Pay safely with Credit/Debit Cards, Paypal and others.
Easy returns
Right of return for 14 days
VaLO series receiver for 230V led luminaires. The receiver is mostly used for dimming led spots, led panels, etc. In addition to the receiver, you will need either a wireless VaLO series button or a WIFI-RF box and an Android/iOS device to control your led lights. One receiver can be controlled by more than one button (e.g. when you need to control the top and bottom of a staircase).
The receiver is installed between the transformer and the mains power supply, i.e. control is done from the primary side.
Please contact us or visit us if you need help with product selection. We will be happy to help you with any questions you may have about LED lighting control and dimming.
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home Lighting controlDimmer and switch for led lightsLed dimmers 230V TRIAC VaLO — LED receiver for 230V led lights, max.100W
- Category Led dimmers 230V TRIAC
- SKU VaLO-V230-100
- Wattage 150
- Voltage (V) 230
- Immennys 230V, Dimmable, Wireless VaLO dimming, Wireless dimming
- Size 50x50x20mm
- Length of the package 10
- Height of the package 5
- Width of the package 11
- Diameter of the product 5
- Change 230V
- Approval CE, RoHS
- PDF ledstore.fivalo-v230-100manualenglish.pdf
- PDF ledstore.fivalo-v230-100manualenglish.pdf
New product review
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
Customer questions
- How does VaLO wireless control work?
- Does VaLO wireless control work reliably?
- Are the VaLO buttons (wall model) made of glass?
- Which furniture series are VaLO wall buttons suitable for?
- How is the button taught to the receiver?
- How to reset the receiver (forget the pairing)?
- How many buttons can be taught to one receiver?
- How many receivers can be taught on one button?
- Will this work with wifi/rf controllers from other manufacturers?
- Moi. How close to other transmitters can transmitters be placed. For example in a warehouse on the same disk tray next to each other? Which placement do you recommend?
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?