5m LED light strip 10cut SOLO TUNNELMA, CCT, 14,4W/m, IP20, CRI93

5m LED strip light 10cut SOLO TUNNELMA, CCT, 24V, 14,4W/m, IP20, CRI93

the 10cut SOLO TUNNELMA 14,4W/m light strip has a 10cm cut-off distance and the colour temperature of the light can be adjusted between 2500K and 7300K. The colour rendering index of the strip is 93 which means that the colours are well reproduced (the best colours are reproduced with 4000K white light as there is no yellowish or bluish tint involved). This led strip is dimmable and the colour temperature control can be operated by ordering a VaLO RF or Zigbee series (CCT) pushbutton and receiver (CCT) .

If you want a custom made led strip or a custom made profile with your own dimensions try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/palvelut/mittatilaus

Product information

The Solo 14,4W/m ribbon is very uniform and efficient (592 lumens per meter) with 280 LED circuits per meter. This makes the light uniform.

Installation

The LED strip comes in 5m rolls and can be cut to size up to 100mm apart. The tape has clear markings to make cutting easier. We recommend soldering the strips together. Our LED strip is easy to attach with the included 3M high grip tape. The soldering points of the tape are located at the cut marks on the underside of the tape under the tape. There are three solder points, one + on one edge of the strip and two minus, cold C and warm W, side by side on the other edge.

We recommend that for long runs (over 10m) the transformer supply is branched at both ends of the LED strip to avoid a reduction in light at one end of the strip. The led strip should always be attached to an aluminium strip so that excess heat is conducted away from the led circuit. This will prolong the life of the led strip. Aluminium profiles can be ordered from our online shop, where we have a wide range of different profiles available.

The CCT led strip is connected to a CCT adjustable transformer (RF or Zigbee) or, in larger installations, to a separate control unit, and the control unit is connected to a power supply which is connected to the mains.

The LED strip works well with solar power, boats and cars if they use 24VDC. Then a separate power supply is not needed. In other cases, order a 24V power supply of suitable power for the strip. The power supply does not need to be dimmable when dimming with a regulator and receiver. Alternatively, a wireless control RF or Zigbee transformer is available, where the transformer is paired directly with the wireless button.

We are happy to help with installation and ordering questions.

To dim the LED strip, you can use the wireless dimmer of our VaLO RF series. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the luminaire, but the luminaire is powered by a constant current.

In the case of a smart home, a Zigbee transformer and controllers for wireless control are chosen. In Zigbee transformers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Create your own light

Why use CCT LED strip only for traditional applications when you can make a luminaire out of almost anything? Create your own wall light by bending the LED strip and the aluminium profile into the shape you want, or by fixing the LED strip to another heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make custom-made LED strip lighting at LedStore's LedShop.