36V LED strip light DRIVER 600W, IP65, Mean Well
High quality Mean Well power supply for 36V LED strip light, with 600W (16,6A) load capacity. 7 years warranty! The power supply can be dimmed from one side or the other with wireless dimmers.
When you are looking for the best possible power supply. 7 year warranty! For large installations and the most demanding customers.
Very high quality Mean Well power supply 36V for led lamps or other devices. Capable of 600W (16,6A) load. The power supply has two outputs that can be branched to multiple strips if required. The power supply has approx. 30cm wires at both ends.
The power supply has an adjustable output in the range 35,4-37,2V. So you can install the transformer without any worries even at a long distance, for example in an electrical cabinet. You can adjust the voltage to suit your needs, ensuring that the voltage is always right for the luminaire.
The power supply can be dimmed from one side or the other with wireless dimmers, such as the 12V/24V wireless dimmer.
Dimensions
- Length: 310mm (body only 252mm)
- Width: 144mm
- Height: 49mm
- Weight: 3.9kg
Protection and more:
Short circuit, overload, overvoltage and overheat protection. Possibility of external control (5v). Operating temperature range exceptionally wide -40 to +90 degrees Celsius in free space. Seven-year warranty. The transformer is waterproof, making it suitable for outdoor use, IP65.
No plug, no LED strip connector/DC plug.
Efficiency of a staggering 94% and no load consumption of only 0.5W, typical operating time 62000 hours.
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home LED accessoriesLED strip driver 36V LED strip light DRIVER 600W, IP65, Mean Well
- Category LED strip driver
- SKU 36V-600W-driver-MW-IP67
- 600
- Life span 62000
- 36V driver 600W IP65 Mean Well
- 310x144x49mm
- 43
- 7
- 18.5
- SAA, CE, TUV and others. Complite list in pictures.
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?