12V LED strip light DRIVER 200W, IP67
Power supply for 12V LED strip light, 200W load capacity. The power supply is moisture resistant to IP67. The power supply can be dimmed from one side or the other with wireless dimmers.
Details
Power supply for 12V led strip light, 200W load capacity. The power supply is moisture resistant to IP67. The power supply is bulky and has a large cooling surface area, making it suitable for heavier use. The power supply has four outputs for e.g. LED strip (the outputs have a connector ready). The power supply has a plug for connection. The power supply can be dimmed from one side or the other with wireless dimmers, such as the 12V/24V wireless dimmer.
You can connect a total of 13,8m of Helmeile 14,4W/m tape or 27,7m of Helmeile 7,2W/m tape to this power supply.
For lengths over 5m, the tape may lose light if only one end of the tape is supplied.
Dimensions
Length: 236mm
Width: 133mm
Height: 63mm
Connecting cable (to mains): 1400mm plus plug
Wires for strips: 400mm plus connector (female)
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home LED accessoriesLED strip driver12V drivers 12V LED strip light DRIVER 200W, IP67
- Category 12V drivers
- SKU 12V-200W-IP67-driver
- Wattage 200
- Life span 3-5 years with constant use
- Model 200W-IP67-12V
- Size 236x133x63mm
- Length of the package 16
- Height of the package 9
- Width of the package 29
- Change Water resistant IP67
- Approval CE, RoHS, IP67
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
- How long is the connecting wire between the 12V or 24V transformer and the luminaire?
- Where to place the transformer?
- How to calculate the transformer size? What does 100W mean in practice?
- Can I install several different led strips on the same transformer?
- What is the difference between a 12V and a 24V transformer?
- What happens if I put a 12V led strip into a 24V transformer or vice versa?
- How long can I put a 12 or 24V transformer before the lamp?
- What is an ampere? Watt? Power?
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?