12V dimmable LED DRIVER 1-10V, 180W, for LED strip, water resistant IP66
Power supply for 12V LED strip light, 180W load capacity. The power supply is dimmable 0/1-10V and is also moisture-proof to IP66.
Details
Power supply for 12V led strip light, 180W load capacity. The power supply is dimmable 0/1-10V and is also moisture-proof to IP66. This power supply comes with three outputs with connectors (female).
You can connect to this power supply a total of 12,5m of 14,4W/m Helmeile tape or 25m of 7,2W/m Helmeile tape.
For lengths over 5m, the tape may suffer from light loss if the supply is only from one end.
Dimensions
Length: 257mm
Width: 80mm
height: 53mm
Connecting cable (230V): 1300mm plus plug
Wires for strips: 60mm plus connector (female)
Other
Input: 100-265V
Output: 12V 15A 180W
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home LED accessoriesLED strip driver 12V dimmable LED DRIVER 1-10V, 180W, for LED strip, water resistant IP66
- Category LED strip driver
- SKU 12V-180W-IP66-dim1-10V
- Wattage 180
- Life span 3-5 years with constant use
- Model 180W DRIVER IP66 12V 1-10V
- Size 257x80x53mm
- Length of the package 8
- Height of the package 9
- Width of the package 29
- Change Dimmable 1-10V, water resistant IP66
- Approval CE, RoHS, IP66, SELV
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
- How long is the connecting wire between the 12V or 24V transformer and the luminaire?
- Where to place the transformer?
- How to calculate the transformer size? What does 100W mean in practice?
- Can I install several different led strips on the same transformer?
- What is the difference between a 12V and a 24V transformer?
- What happens if I put a 12V led strip into a 24V transformer or vice versa?
- How long can I put a 12 or 24V transformer before the lamp?
- What is an ampere? Watt? Power?
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?