DALI DT8 LED DRIVER 12W, CCT, dimmable, 100-700 mA
- 100-700 mA, DIP Switch
- changeable color temperature, CCT
- DALI DT8 dimming
- max 12W
- Quick terminals
This category is for DALI Control Gear. We have high quality DALI controllers. All of our products have 5 years quarantee. We have items in stock and you can visit our shop to see products physically.
We have DALI and DALI2 items, DT6 and DT8 protocols supported.
Products include:
These DALI and DALI2 drivers are designed to be adjusted to match perfectly you LED needs. You can adjust mA easily with you phone, without power to your LED driver!
Current range is from 100mA to 1500mA and power range is from 10W to 65W.
These mA adjustble drivers are used most commonly with CCT led lights and are DT8 supported.
Most common DALI2 driver types. Power output range is 50-200W 24V, and they support CCT, RGB and RGBCCT.
In other words, they support DT6, DT8 Tc, DT8 XY, DT8 RGBWA device types
These DALI relays are usually used to turn ON/OFF any device up to 1000W. Water pump, valve, etc.
Dimmers are usually used for single color LED lighting with TRIAC drivers.
ECG stands for Electronic Contor Gear, i.e. any device that supplies voltage to lights, etc. So these include DALI transformers and DALI relays. One DALI master can control up to 64 (OUTPUT) ECG devices.
DALI dimming is a lighting control system that uses a digital protocol to communicate between the lighting controller and the lights themselves. This allows precise control of the brightness and colour of individual lights or groups of lights, as well as the storage and recall of pre-programmed lighting situations. DALI dimming systems typically consist of a DALI controller that sends commands and DALI-compatible lights that can receive and respond to those commands.
DALI works best when it is designed and built from the ground up. This is because it needs two control wires running between the devices.