VOID recessed round GU10 and MR16 Lamp frame, IP44 black

Black round IP44 recessed lamp holder for GU10/MR16 lamps

LedStore's black round 20mm recessed lamp holder, i.e. the lamp holder and the lamp holder of your choice, is created for spaces and needs where changing the lamp must be possible. We recommend using a halogen replacement LED bulb with this product as LED is energy efficient, has lower heat output and a long lamp life.

Less glare, round shapes

This frame has been designed to reduce glare, as the light source is recessed 20 mm from the surface. The aluminium frame is finished with a matt black paint.

The mounting hole is 70 mm. The frame is held in the opening by two springs, which are provided in the frame.

The frame has an external diameter of 85 mm and a height of 30 mm. The frame remains 2 mm above the surface of the roof.

IP44 protection

The clear glass lens of the frame prevents water splashes on the ceiling and makes your luminaire IP44 protected.

Led bulb options

GU10 LED bulb

GU10 bulbs use direct mains power. We have several GU10 models, including warm 3 000K and neutral 4 000K white, as well as a colour temperature adjustable Zigbee bulb.

The mounting space in the inner cover with GU10 should be at least 100 mm including the frame, GU10 bulb and lamp holder.

MR16/GU5.3 LED lamp

MR16 (GU5.3) bulbs use 12V DC voltage and therefore require a power supply. We have several MR16 models, including warm 3 000K and neutral 4 000K white. We also offer 12V power supplies for different sizes of luminaires.

The mounting space in the inner cover with MR16 should be at least 80 mm including the frame, MR16 lamp and lamp holder

Safety note for installation

For this product you must take into account all fire regulations made for the installation of halogens, as it is possible to install a halogen lamp in this frame and bracket. The halogen can reach temperatures of over 200 degrees Celsius.

Information from

LedStore's KEHYS+KANTA package is intended for applications where a standard and interchangeable bulb is required. We recommend using a high quality LedStore LED bulb in the frame, so that replacement is less frequent and the heat load generated by the light source is minimised.

When choosing a flush-mounted LED luminaire with replaceable bulb, it is important to note that the luminaire must be surrounded by fire protection in the same way as halogen lamps. If no such protection is fitted, the cost should be taken into account when choosing the luminaire. The protection is required for fire safety reasons, as it is possible to inadvertently replace an LED bulb with a halogen bulb that can heat up to over 200 degrees Celsius. Such damage cannot occur with LED spots whose lampholder type/module is not identical to that of previous halogen lights.

Finally

We recommend using LedStore's advanced GU10 or MR16 led bulb. This light achieves a staggering colour rendering index of almost 100 points, so the light reproduces the colours of the environment exactly as they are intended. Energy savings are to be expected, as one 6W spot is equivalent to as much as 50W halogen with the same light output. So get a powerful LedStore spotlight that lasts and is available in dimmable or even temperature-controlled in ZIGBEE smart lighting.