Syöttörasia - XTS 11-2 MUSTA OIKEA
Terminal block - XTS11 for 3 phase rail, Black.
Note: Made to order, not in stock.
This black 3-phase rail O.K. power supply is intended for installation on a rail in the roof or for surface mounting. This piece is therefore used to supply electricity to your 3-phase rail from the end.
Terminal block - XTS11 for 3-phase rail, BLACK.
This black 3-phase rail O.K. power supply is intended for installation in a rail in the roof or for surface mounting. This piece is therefore used to supply electricity to your 3-phase rail from the end. Order the 3-phase rail and the necessary brackets separately, as well as the end plug. the 3-phase rail can be seen in our shop, as well as the rail lighting fixtures to be installed on it, welcome to have a look!
Global Track Pro
Genuine Finnish Global Track pro rail system, an internationally renowned standard. Global Track 3-stage rail is also often referred to as Nokia track, as it is a product developed by Nokia Aluminum in 1962, which later changed its name to Nordic Aluminum in 1996. We only sell the Genuine Finnish track system.
About the installation
This End Feed is installed by pushing it into the end of the profiles and tightening the screws on it. Inside the housing are sturdy screw connectors for 3 stages.
So in addition to the rail, you will always need a power supply at either end. Note that the 3-phase rail has "handedness", i.e. the light rail has a built-in notch on one side to prevent the parts from being connected the wrong way round. This is known as a right handed. A recessed rail will accept all the same components as a surface-mounted 3-phase rail.
So be careful when ordering parts and read the Global Track Pro instruction sheet carefully before ordering parts
Luminaires and accessories
3-phase track lighting is ordered separately! you can find them in their own category, but you can also attach any pendant light to the 3-phase track system using separately purchased adapters.
Size: 32,5 mm x 31,5 mm x 100 mm
Material: black plastic
Manufacturer's code: contact rail - XTS11-2
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home LED accessories3-Phase Track Syöttörasia - XTS 11-2 MUSTA OIKEA
- Category 3-Phase Track
- SKU TRACK-XTS11-2-INPUTR-B
- Length of the package 3.25
- Height of the package 3.15
- Width of the package 6.6
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?