Surface LED strip aluminium profile CORNER MOUNT 2.5m, two directions White
White indirect profile for corner installation. Vertical in the corner of a room or horizontal at the ceiling. Provides light in 2 directions from behind the glare shield. Easy to paint the front separately.
White indirect profile for corner installation. Standing in a corner of a room or horizontally at the ceiling to replace ceiling tiles. Provides light in 2 directions from behind a glare shield. Easy to paint the front separately if white is not to your liking. Install the base first and press the glare shield in place at the end.
We recommend 14,4W COB CCT strip for variable light and atmosphere.
The profile is installed in our shop.
NOTE! DOES NOT INCLUDE LED STRIPS!
Will not fit in a PO Box, ONLY home delivery as shatterproof or we recommend pick up from our Vantaa store.
Height: 62mm, Depth: 62mm, Lenght: 2500mm
Dimensions: 62mm, length: 5mm, length: 20mm, length: 20mm, length: 20mm
Diffuser: opal white
Profile: white powder coated aluminium
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home Led Lights Surface LED strip aluminium profile CORNER MOUNT 2.5m, two directions White
- Category Led Lights
- SKU profile-INDIRECT-3-W
- 255
- 8.0
- 8.0
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?