Outdoor LED PILLAR — CUBIC 2x5W, two directions, 3000K
LED yard light - PILARI CUBIC 2, bi-directional model best suited for lighting walkways, planting and terraces. The light source is two 5pcs 1W Creen powerLED sets, equivalent to approximately 2x40W halogen (2x400 lumens).
LED yard light - PILARI CUBIC 800
LED yard light - PILARI CUBIC 2 has a sleek and modern design. The PILARI CUBIC 2 bi-directional model is ideal for illuminating walkways, planting and terraces.
The luminaire is equipped with two 5pcs 1W Creen powerled light sources. The LEDs are perfect for Finnish weather, as the LED's are cold resistant (they burn brighter and last longer in the cold). The PILARI CUBIC 2 has a light output equivalent to about 2x40W halogen, so the light output is about 2x400 lumens (i.e. 400 lumens per direction). The colour of the light is the familiar shade of halogen, 3000K, which is a warm white light.
The luminaire is 80cm high and 12x12cm square. The surface of the luminaire resembles sandblasted metal, but is weatherproof powder coated and grey in colour.
Installation
The power supply is located in the luminaire body, which is removable from the body for easy installation. The base of the luminaire is fitted with a metal plate which makes it easy to mount the luminaire pole on, for example, the decking of a terrace.
More
The same series is also available in the wall luminaire models CUBIC OUT for one-way lighting and CUBIC OUT 2 for two-way lighting.
Protection class IP55. Our luminaires are RoHS and Ce approved.
The LED yard light can be seen in our warehouse.
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home Led AreasExterior LED lightingTerrace Outdoor LED PILLAR — CUBIC 2x5W, two directions, 3000K
- Category Terrace
- SKU Pillar-Cubic2-80cm
- 10
- 800
-
Driver is inside the body, on the top part that is detachable. This makes the installation very easy. The bottom part has a plate that is mounted on decking or such.
- 3000
- Life span 35000
- Pillar 2
- 120x120x800mm
- 19.5
- 87.5
- 21
- CE, RoHS, IP55
- PDF led_pilari_cubic_2_2x5w.pdf
- PDF led_pilari_cubic_2_2x5w.pdf
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
- hi, is there a replaceable led bulb on this cubic? We have one of our cubic's that went out.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?