Outdoor LED PILLAR 60cm — ROUND, water resistant IP55, 3W, 3000K
LED PILARI outdoor light round is a beautiful and simple light for your garden. It is symmetrical, so it can be used in planting, on terraces and on garden paths.
LED PILARI round is a lighthouse-like, beautiful and simple luminaire to illuminate your garden. It is symmetrical, so it can be used in planting, on terraces and on garden paths. It is 60cm high, so it doesn't look bad when mounted on low walls.
The light source is a 3W Creen powerled, which is perfect for Finnish weather because the LED keeps the cold out. In terms of light output, it's the equivalent of about 25W halogen, or 300 lumens. LEDs are perfect for Finnish weather because they like it cold (they burn brighter and last longer in the cold). The colour of the light is the same shade as halogen, 3000K, which is a warm white light.
LED PILARI PYRE GREEN is a 600mm high and 80mm diameter LED lighting pole. The surface of the luminaire resembles sandblasted metal, but is weatherproof powder coated and grey in colour.
Installation
The power supply is located in the luminaire section, which is removable from the body, allowing for easy installation. The base of the luminaire is fitted with a metal plate which allows the luminaire to be easily mounted, e.g. on the decking of a terrace.
More
The same series is also available in the wall luminaire models ROUND OUT 1 direction and ROUND OUT 2 2 directions.
Protection class IP55. Our luminaires are RoHS and Ce approved.
The luminaire can be seen in our warehouse.
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home Led AreasExterior LED lightingTerrace Outdoor LED PILLAR 60cm — ROUND, water resistant IP55, 3W, 3000K
- Category Terrace
- SKU PillarRound
- Wattage 3
- Lumen 300
- Designed in Finland No
- Installation
Driver is inside the body, on the top part that is detachable. This makes the installation very easy. The bottom part has a plate that is mounted on decking or such.
- Colour temperature (K) 3000
- Life span 35000
- Model PILLAR round
- Size Height 600mm, diameter 80mm
- Length of the package 20
- Height of the package 20
- Width of the package 69
- Diameter of the product 8
- Approval CE, RoHS, IP55
- PDF led_pilari_pyorea_3w.pdf
- PDF led_pilari_pyorea_3w.pdf
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?