Motion PIR sensor switch with light level sensor, wall installation, IP20
This motion sensor (PIR) can be used to switch on lights in a room. Works best in spaces where people are most often just passing by, such as closets, vestibules, storage areas, technical rooms and pantries. The PIR sensor switches the lights on when it detects movement in the beam area. Also includes a twilight sensor, which makes this great for night lighting, turning on the lights from motion only when it's dusk.
- can also be used as a circuit breaker
- does not include the lamp
- installation uppoon
- large detection radius
- sensor for dry areas in a wall box
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home LED accessoriesMotion detectors and light sensorsMotion detectors Motion PIR sensor switch with light level sensor, wall installation, IP20
- Category Motion detectors
- SKU MOTION-INWALL
- Change Maximum load for LED luminaires 200W
- Size 82mm x 82mm x 45mm
- Wattage 200
- IP class IP20
- Guarantee (year) 2 years
- Designed in Finland No
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?
