Motion PIR sensor switch with light level sensor, for recessed installation, IP20
In stock at 4 pcs
SKU#: MOTION-mini-PIR
0 / 5 (0)
Motion sensor with light level sensor. Suitable for use in warehouses, porches, toilets and cloakrooms and why not even to turn on the lights in the carport. Recommended to be mounted in the AP 7 mounting box so that the PIR sensor comes through its lid, allowing outdoor use. Thickness of the material to be installed max. 4,4mm.
Read more
€ 39.00
VAT 0% | 24%
Add a comment to the order
Delivery methods
Free shipping for orders over to %s
Payment Methods
Pay safely with Credit/Debit Cards, Paypal and others.
Easy returns
Right of return for 14 days
The microwave sensor turns on the lights when it detects movement within the sensing range and when the light level is at the desired level. For example, whenever motion is detected or whenever motion is detected and it is dim. The sensor's radar detects motion within a 3m or 6m radius (adjustable). Installation is recommended e.g. in an AP 7 mounting box, because the PIR sensor is mounted in a hole and the material thickness can be max. the sensor switches on the luminaires when it detects movement and switches off after the last detected movement. The time delay can be adjusted between 5sec. and 8min.
How to set the microsensor in operation:
- Set the desired light level at which the motion sensor turns on the lights. If you want the lights to turn on in daylight, set the sensitivity to 2000 lux (the lights will turn on in light below 2000 lux) and if you want the lights to turn on only in darkness, set the sensitivity to 10 lux.
- Set the detection distance to 3m or 6m.
- Set the time delay, i.e. the time the lights are on after the last detected movement.
Specifications of the microwave sensor:
- On after last detected movement 10 sec, 1 min, 3 min, 5 min, 8 min
- Installation height 2,2 m - 4 m from floor or 1,8 m - 2,5 m for wall mounting
- Detection radius 3m, 6m (adjustable)
- Detection range 120 °/360 °
- Dimming 10 lx / 2000 lx (adjustable)
- Ignition delay 0,6 - 1,5 m/s
- Maximum load 800W (incandescent), 200W (LED and energy saving lamps)
- Power consumption 0.5W (when operating)
- Mounting hole 12mm
- Max. thickness of material to be mounted 4,4mm
- Protection class IP20
- Delivery status In Stock
- Brand Ledstore
- Breadcrumbs Home LED accessoriesMotion detectors and light sensorsMotion detectors Motion PIR sensor switch with light level sensor, for recessed installation, IP20
- Category Motion detectors
- SKU MOTION-mini-PIR
- 200
- 60
- MOTION-mini-PIR with light level detector
- Diameter 80mm, height 42mm when surface mounted.
- 10
- 5.1
- 4.9
- Max. load with LED lights 200W
New product review
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
Customer questions
No questions yet.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?