LED strip aluminium PROFILE 2500X41X18mm, for indirect light
Surface-mounted aluminium profile with opal diffuser, mounting clips and end caps, for LED strip. With this aluminium profile you can easily create indirect lighting in your home.
Surface-mounted aluminium profile with opal diffuser for LED strip mounting. With this profile you can easily create indirect lighting in your home. The matt aluminium profile conducts heat away from the LED strip, which is a prerequisite for the longevity of the LED strip. Perfectly suited for use with different coloured surfaces. The profile is on display in our warehouse. In addition to the profile, the package includes an opal diffuser, mounting clips and end pieces.
THE LED TAPE IS ORDERED SEPARATELY. Recommended for use with either the FLAT 17W/m or the HELMEILE 14,4W/m strip to create bright general lighting.
NOTE! Length 2,5 m. The aluminium profile will not fit in the SMART POST box. Pick-up or home delivery only.
Size: height 4 cm width 0,7 cm. Length of the whole profile 2,5 m.
Diffuser: opal plastic
End pieces and clips: grey plastic
Material: aluminium
- Delivery status Out of Stock
- Brand Ledstore
- Breadcrumbs Home Led Lights LED strip aluminium PROFILE 2500X41X18mm, for indirect light
- Category Led Lights
- SKU Profile-INDIRECT
- Length of the package 5.5
- Height of the package 5.5
- Width of the package 252
- Change Includes also clips, opal cover and end caps.
- PDF alumiiniprofiili_2500x41x18mm.pdf
- PDF alumiiniprofiili_2500x41x18mm.pdf
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
- Why do I need an aluminium mounting profile for LED strip?
- Is it true that if I install an LED strip without a profile, its lifetime is easily only 1-2 years?
- How do I make corners on an aluminium profile?
- How to make long installations, up to 5 metres?
- Can I install a profiled led strip under a drying cabinet?
- What are the brands of led plafonds and led panels sold at LedStore?
- Is it easy to cut the aluminium profile?
- How are surface-mounted aluminium profiles fixed to the cabinet/wall?
- What comes with the led profile?
- What if I split the profile into several parts and need more end caps and brackets?
- Is it possible to install a led profile on the shower floor?
- What size led strip will fit inside the rail.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?