LED SET for sauna - WARM 3000K SOLO 7,2W/m, no dimming

LED sauna strip 5 m WARM light set SOLO 7,2 W/m 3000K

More efficient led strip for sauna with warm shade. With this 5 m set, your sauna lighting will be perfect at once! You can easily divide the strip and profiles into two lengths of up to 2.5 meters.

Sauna lighting?

This set includes a ready-to-use accessory kit to give your sauna a traditional warm glow. Sauna lighting is an important part of the sauna atmosphere. The set is NOT DIMMABLE.

This set is for those who are not afraid of a little work, and you may need to do some soldering if you cut these into more than two pieces.

Set includes

WARM LED strip set for sauna includes:

• 1 roll, 5 metres of 7.2 W/m SOLO 3000K IP65 led strip
• 1 driver IP65
• 2 pcs, surface-mounted aluminium profiles with accessories (length 2,5m per profile). Choice of several different profiles
• 5 m of 2-pole low-current cable and 2 lever connectors (2x3 outputs per connector)

Information

The 7,2/m strip has a light output of +500 lumens per meter, a generous light output for a typical sauna with light pine or tarred alder materials. This will fit directly into a darker sauna. The base colour of the strip is white, but you won't see it, as it is always mounted on the aluminium profile that is always included, and the 3M special tape on the LED strip ensures a good fixing to the profile. So with this set you get even, spotless light for your sauna. The LED circuit is a COB technology model with a colour rendering index (CRI) of over 95!

What is the difference between COB and SMD LEDs? We wrote about it in our blog.

Then the more difficult part, i.e. the angles and extensions. You see, the ribbon has standard 50 cm wires at each end, so by cutting it at the relevant point (every 5cm), you get two ribbons. To these you can connect, if the installation space allows, the included lever connectors and the wire to the transformer. So if you want more than one strip, you will have to connect new wires to the copper points at the cut-off point. Led tape uses two (2) pole wires. Positive + and Negative -. The package includes 5 meters of 2 pole wire and lever connectors to extend the wire to the transformer. Led strip product description.

The sauna profile is IP44 splash-proof at the bottom and IP65 waterproof at the top, so you can install it under the ceiling or behind the backrest without any worries. The ends of the profiles must be checked for tightness. Aluminium is also easy to cut with a hacksaw or even with a wood chipper.

The included transformer is waterproof, so you can mount it directly on the wall under the ceiling. Of course, the connections must be sealed.

Of course, you can install this LED sauna set in other places than the sauna, for example on the terrace. The only limit is your imagination.

Help? DIY led strip for sauna?

If you need help and would like to order the led strips made to your dimensions, you can do it with our PAJA service.

You can play with our COUNTER and calculate the made-to-measure prices, even though the counter is nominally a kitchen counter. The same strips, profiles and guide products can also be found there. Imagine the countertop is under the ceiling, the top of the cabinet is behind the back, etc..

You can also order your lighting installed from our INSTALLATION service.

Installation tips

Sauna lighting is installed like any other led strip installation. The tape should be bonded to metal, such as an aluminium profile (supplied), to conduct heat away from the LED circuit. Proper cooling will extend the life of the LED. Also, in saunas and other damp areas, wood will live and the adhesive on the led strip will not stay in place for long without a profile. NOTE! Led strip does not fold laterally, so corners must be cut and soldered with tin pins, or run a separate connecting wire to the transformer for each piece.

Outline of the strip installation:

1. Measure the installation site
2. Cut the LED strips to the correct length (every 5cm from the cut-off point)
3. Cut the profiles (with a scalpel or hacksaw), leaving a couple of centimetres extra for the led strip connection.
4. Glue the led strips to the profile on the table before attaching the profiles and press the covers and ends into place.
5. Screw the profile brackets into the mounting location. 4-5pcs brackets / 2,5m and snap the profiles into place.
6. Run the wires from the led strip to the transformer (hole in the grommets 7mm) and connect to the transformer with the connectors.
7. The electrician will take care of the mains installation.
8. Enjoy the light!

What are the options for led strip for sauna?

• 3,6W Temperature adjustable CCT dots-free set: for light saunas where mood lighting is desired.
• 7,2W Temperature adjustable CCT Dotless set: for dark saunas or where more light is desired.
• 7,2W 3000K warm dimmable spotless set: for dark saunas where you like warm tones. Wireless control.
• 7,2W 4000K Neutral Dimmable ON/OFF set: for dark saunas where cool tones are preferred. A simpler set.
• 7.2W 4000K Neutral Dimmable Set: For dark saunas where cool tones are preferred. Wireless control.