LED power supply, 24V, 240W, POS, DALI-2 DT6 / PUSH-DIM, IP20

POS 240 W 24 V constant-voltage LED transformer, IP20 enclosure rating. A DALI-controllable solution; the DALI device type is listed below along with its practical implications.

Control and dimming in practice

DALI DT6: one LED output / brightness control; no DT8 color temperature or RGB control. Also features local push-button control.

DALI DT6 or DT8?

This ballast is the DT6 model. A single DALI address controls the brightness of a single LED output. The DT6 itself does not provide CCT (color temperature) or RGB/RGBW color control; these require DT8 color control or multiple individually controllable DT6 channels.
DALI support for this product: DALI-2; DT6; IEC 62386-101, 102, 207.

PUSH / button control: PUSH DIM: ON/OFF and brightness adjustment. This allows for local operation even without a separate DALI command, but a DALI bus is required for DALI system control.

Technical Specifications

• Manufacturer’s model: FTPC240V24-DA
• Input voltage: 220–240 V AC
• Output voltage: 24 V DC
• Output: Constant Voltage (CV)
• Output current: 10 A
• Maximum power: 240 W
• IP rating: IP20
• Protection class: Class II
• Dimensions (D × W × H): 429.5 × 32 × 22.5 mm
• Connections: Connectors according to the manufacturer's model; check the image/datasheet
• DALI device type: DT6
• Controllable channels: 1
• Warranty: 3 years

Important installation notes

Connect only LED loads designed for a constant 24 V DC voltage. Allow a sufficient safety margin in the power rating and verify the polarity before commissioning.

Fixed connections on the 230 V AC side must be made by a qualified electrician. Always check the product’s nameplate and the manufacturer’s installation instructions before making any connections.