LED power supply, 24V, 36W, LTECH, DALI-2 DT6 / PUSH-DIM, IP20

LTECH 36 W 24 V constant-voltage LED transformer, enclosure class IP20. A DALI-controllable solution; the DALI device type is listed below along with its practical implications.

Control and dimming in practice

DALI DT6: one LED output / brightness control; no DT8 color temperature or RGB control. Also includes local push-button control.

DALI DT6 or DT8?

This ballast is the DT6 model. A single DALI address controls the brightness of a single LED output. The DT6 itself does not provide CCT (color temperature) or RGB/RGBW color control; these require DT8 color control or multiple separately controllable DT6 channels.
DALI support for this product: DALI-2; DT6; LED driver / single-channel DALI.

PUSH / button control: Push DIM: short press ON/OFF, long press dimming, dimming memory. This allows for local operation even without a separate DALI command, but a DALI bus is required for DALI system control.

Technical Specifications

• Manufacturer’s model: LM-36-24-G1D2
• Input voltage: 200–240 V AC
• Output voltage: 24 V DC
• Output: constant voltage (CV)
• Output current: 1.5 A
• Maximum power: 36 W
• IP rating: IP20
• Protection class: Class II
• Dimensions (D × W × H): 210 × 43 × 30 mm
• Connections: Screw terminals; input approx. 0.75 mm²
• DALI device type: DT6
• Controllable channels: 1
• Warranty: 5 years

Important installation notes

Connect only an LED load designed for a constant 24 V DC voltage. Allow a sufficient safety margin in the power rating and verify the polarity before commissioning.

Fixed connections on the 230 V AC side must be made by a qualified electrician. Always check the product’s nameplate and the manufacturer’s installation instructions before making any connections.