KGP 100 W 24 V constant-voltage LED transformer, IP20 enclosure rating. A DALI-controllable solution; the DALI device type is listed below along with its practical implications.
Control and dimming in practice
DALI DT6: one LED output / brightness control; no DT8 color temperature or RGB control. Also includes local push-button control.
DALI DT6 or DT8?
This ballast is a DT6 model. A single DALI address controls the brightness of a single LED output. The DT6 itself does not provide CCT color temperature or RGB/RGBW color control; these require DT8 color control or multiple independently controlled DT6 channels.
DALI support for this product: DALI-2 certified; DT6; IEC 62386-101, 102, 207, 251, 252, 253.
PUSH / button control: PUSH DIM / switchDIM for brightness control without a DALI master. This allows for local operation even without a separate DALI command, but a DALI bus is required for DALI system control.
Technical Specifications
- Manufacturer’s model: LV100W24CG2-DALI
- Input voltage: 220–240 V AC
- Output voltage: 24 V DC
- Output: constant voltage (CV)
- Output current: 4.17 A
- Maximum power: 100 W
- IP rating: IP20
- Protection Class: Class II
- Dimensions (D × W × H): 350 × 30 × 18 mm
- Connections: Connectors according to the manufacturer’s model; check the image or datasheet
- DALI device type: DT6
- Controllable channels: 1
- Warranty: 5 years
Important installation notes
Connect only LED loads designed for a constant 24 V DC voltage. Allow a sufficient safety margin in the power rating and verify the polarity before commissioning.
Fixed connections on the 230 V AC side must be made by a qualified electrician. Always check the product’s nameplate and the manufacturer’s installation instructions before making any connections.
