LED Ballast, 24V, 96W, BILTON SXT, 4 x DALI DT6, RGBW, IP20

BILTON 96 W 24 V constant-voltage LED transformer, IP20 enclosure rating. A DALI-controllable solution; the DALI device type is specified below along with its practical implications.

Control and dimming in practice

4 independent DALI DT6 channels; RGB/RGBW is formed using separate channels, not a single DT8 color address.

DALI DT6 or DT8?

This BILTON is not a true DT8 color driver; rather, it features four independent DT6 channels. RGB/RGBW can be implemented using four outputs, but the DALI system treats the channels as separate DT6 controls. This is an important difference from a DT8 solution, where color functions can be controlled via a single DALI address.
DALI support for this product: DALI (IEC 62386); 4 x DT6; EN 62386-101, 102, 207.

Technical Specifications

• Manufacturer’s model: SXT-24414
• Input voltage: 220–240 V AC, 50/60 Hz
• Output voltage: 24 V DC
• Output: Constant Voltage (CV)
• Output current: 4 A total
• Maximum power: 96 W
• IP rating: IP20
• Protection class: Class III
• Dimensions (D × W × H): 226 × 53 × 45 mm
• Connections: Connectors according to the manufacturer’s model; check the image/datasheet
• DALI device type: 4 x DT6
• Controllable channels: 4 independent
• Warranty: 5 years

Important installation notes

Connect only LED loads designed for a constant 24 V DC voltage. Allow a sufficient safety margin in the power rating and verify polarity before commissioning.

Fixed connections on the 230 V AC side must be made by a qualified electrician. Always check the product’s nameplate and the manufacturer’s installation instructions before making any connections.