1m LED RGBW STRIP SMD 5050, 14,4W/m (72W/5m) 24V, water resistant IP65

In the Kameleontti light strip we use RGB+4000K led circuits with a white colour rendering index of 85. This led strip light is efficient, dimmable and waterproof (thin, non-yellowing silicone surface). Our led strip light is easy to attach with the 3M high adhesive tape. Other accessories such as transformer, regulator, aluminium profile are ordered separately. The total power consumption of the led in a 5 meter roll is 72W (36+36W), so if you install the whole 10 meters, you will need at least 80W 24V transformer.

For stylish playful lighting

Our chameleon RGB strip has a luminous intensity of 14.4W/m (7.2W RGB + 7.2W 4000K) and 60 LED circuits per metre. the 14 W/m power makes the light sufficient for illumination. The RGB led strip light is used in spaces where a changing atmosphere is desired by changing the colour of the light. The strip light also has a white 4000K led circuit. The white light of the strip light has a colour rendering index, CRI, of 85, which is suitable for use in home lighting.

The LED has very low specularity when viewed directly from the front, when mounted on e.g. a 16x18mm white aluminium profile. In the kitchen, for example, when mounted on top of cupboards, the whole room is lit evenly (no pinpointing) and the mood changes. In living rooms / cinema rooms, a RGB-led strip light can be used to create a stylish atmosphere, for example in the chute of a drop-down sash or on the shelf of a sash. Lighting shelves and levels with RGB-led strip lighting from different directions also creates an interesting, changing look throughout the room. In children's rooms and bedrooms, RGB-led strip lighting is also a great choice when joy and life are desired, or alternatively for calm and relaxing lighting. RGB-led strip lighting is also used in bathrooms and wet rooms. Care should be taken when installing the luminaire in submersible installations. The surface of the strip light is waterproof, but it does not come with pre-waterproof connectors.

Installation

Led strip light comes in 1m rolls and can be cut to size and soldered every 10cm. We also sell the strip in lengths of your choice. The tape has clear markings to make cutting easier. There is a 10 cm connection cable (5-conductor) at each end of the roll. We recommend soldering the connecting wires together, as we have found that the quick-release fasteners loosen over time and that loosening causes the lights to flash. A carefully done LED strip light installation will last for years. The RGB-led strip light has a calculated lifetime of 35 000 hours. We are happy to help with installation and product selection.

The RGB-led strip light can be operated with the VaLO series wireless controller and control unit, which is connected between the strip light and the power supply. It can also be installed with transformers for wireless control (such as RF or ZIGBEE). Installation with a wired wall controller and a 24V non-dimmable transformer is also possible.

We recommend powering from both ends if the strip light is installed in a continuous length of more than 10 meters. This prevents light loss and provides an equally bright light at both ends. the LED strip should always be attached to an aluminium strip to allow excess heat to escape from the LED circuit. This will prolong the life of the led strip light and keep the warranty valid.

The led strip light works well with 24V systems such as solar power, boats and cars. Then a separate power supply is not needed. In other cases, order a suitable 24V power supply for the strip light (e.g. 10m 14,4W is 72W in total, so any 24V power supply over 80W will work).

See

To dim your led strip light you can use the wireless dimmer of our VaLO RF-series. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the luminaire, but the luminaire is powered continuously.

In the case of a smart home, a Zigbee transformer and controllers for wireless control are chosen. In Zigbee transformers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip light and the power supply. You can then control the strip light with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Create your own light

Why use an LED strip light only for traditional applications when you can make a light from almost anything? Create your own wall light by bending the LED strip light and the aluminium profile to the shape you want, or by attaching the LED strip light to any other heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip light. A good design is half the job. We are happy to help you with your design, and we make custom-made led strip lights in the LedStore's LedShop.

Light colour temperature

RGB (red, green and blue) + 4000K (with remote control), or with a wired wall controller three white tones.