1m LED RGBW 4000K STRIP NEON, BENDABLE 14,4W/m 24V IP65

NEON RGBW IP65 waterproof LED strip is easy to install, cut and bend into different shapes. The strip can be cut every 10cm. 12mm wide.

The colours of the light of the NEON bendable strip can be freely adjusted. The strip has its own separate white light (4000K) and has a colour rendering index of over 85 which means that the colours are reproduced ok.

This LED ribbon is dimmable and the colour adjustment can be made by ordering a VaLO series RF or Zigbee (RGB) button and receiver (RGB) . The ribbon is sold in 1 metre batches so we cut the quantity you buy from the roll and include end plugs and clips 1 per metre + 1 each.

If you want a custom made led ribbon or a custom made profile with your own dimensions try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/palvelut/mittatilaus

Product information

Our mood strip is 14,4W/m (1000 lumens per meter) and has 60 LED circuits per meter. This makes the light uniform enough for indirect lighting, for example. The heat-conducting silicone coating around the ribbon smoothes the light beautifully and is waterproof at the same time. NEON led is easily bendable. You can easily get the strip in the desired curve without soldering. When indirectly illuminated through a wall, the light is even. The strip's white 4000K light has a CRI of over 85, which is ok and suitable for use in advertising and outdoors.

Installation

The LED strip comes in 25m rolls (sold by the metre!) and can be cut to size in increments of 10cm. There are clear markings on the tape to make cutting easier.

First cut the silicone open around the LED strip and only then cut the strip with scissors at the mark. The led strip can be extended by soldering and the silicone glued tightly with silicone glue.

Our Led strip is easy to attach with the aluminium fasteners included. 1 per metre.

We recommend that one transformer is not used to feed a 24V strip over 10m (regardless of power), to avoid light reduction at the other end of the strip. So if you need more than 10m of ribbon, we recommend to supply voltage to the ribbon from both ends.

The RGBW led strip is connected to a control unit, and the control unit is connected to a power supply which is connected to the mains.

The LED strip works well with solar power, boats and cars if they use 24VDC, then a separate power supply is not needed. In other cases, order a 24V power supply of suitable power for the strip. The power supply does not need to be dimmable, as dimming takes place between the strip and the control unit, after the transformer.

We will be happy to help you with any questions regarding installation and ordering.

Click here to read our article on the use of NEON led strip in various applications:

The muss and fuss of making a special ceiling light

Led ribbon for terraces

Dim the lights

To dim your LED strip, you can use the wireless dimmer in our VaLO RF series. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no switch on the wall for the luminaire, but the luminaire is powered continuously.

In the case of a smart home, a Zigbee transformer and controllers for wireless control are chosen. In Zigbee transformers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Create your own light

Why use an LED strip only for traditional applications when you can make a light from almost anything? Create your own wall light by bending the LED strip and the aluminium profile to the shape you want, or by fixing the LED strip to another heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make LED strip made to measure at LedStore's LedShop.

We have also built our own lighting fixture for our store from our own product. Here's an article on a subject where not everything went right at once, but the end result is really spectacular! Read our blog: the NEON ribbon on the ceiling