POS 170 W 12 V constant-voltage LED transformer, IP20 enclosure rating. A DALI-controllable solution; the DALI device type and its practical implications are described below.
Control and dimming in practice
DALI DT6: one LED output / brightness control; no DT8 color temperature or RGB control. Also includes local push-button control.
DALI DT6 or DT8?
This ballast is the DT6 model. One DALI address controls the brightness of a single LED output. The DT6 itself does not provide CCT (color temperature) or RGB/RGBW color control; these require DT8 color control or multiple separately controllable DT6 channels.
DALI support for this product: DALI-2; DT6; IEC 62386-101, 102, 207.
PUSH / button control: PUSH DIM: short press ON/OFF, long press dimming; >11 s returns to 100%. This allows for local operation even without a separate DALI command, but a DALI bus is required for DALI system control.
Technical Specifications
- Manufacturer’s model: FTPC200V12-DA
- Input voltage: 220–240 V AC
- Output voltage: 12 V DC
- Output: constant voltage (CV)
- Output current: 14.2 A
- Maximum power: 170 W
- IP rating: IP20
- Protection class: Class II
- Dimensions (D × W × H): 429.5 × 32 × 22.5 mm
- Connections: Connectors according to the manufacturer’s model; check the image/datasheet
- DALI device type: DT6
- Controllable channels: 1
- Warranty: 3 years
Important installation notes
Connect only an LED load designed for a constant 12 V DC voltage. Allow a sufficient safety margin in the power rating and verify the polarity before commissioning.
Fixed connections on the 230 V AC side must be made by a qualified electrician. Always check the product’s nameplate and the manufacturer’s installation instructions before making any connections.
