Aluminium profile for led strip EPÄSUORA Z for roof and wall edge, 2000x50x44mm

Wall to ceiling aluminium profile for LED strip

The EPÄSUORA Z LED profile is the perfect choice for those looking for a sophisticated and invisibly integrated lighting solution that frames a space in an elegant and discreet way. Designed to be plastered/screwed, this aluminium profile allows installation directly into plasterboard, creating a recessed and indirect lighting effect along the edges of the room.

EPÄSUORA Z is an excellent choice for modern and minimalist interiors that emphasise understated elegance and quality lighting finishes.

About the installation

With this aluminium profile, you can create a neat indirect lighting effect at the wall/ceiling interface. The profile has a plastered wing for fixing to the panel and the other side is screwed to the wall.

The dimensions of the profile are designed for traditional 2" x 2", i.e. 48x48mm ceiling coving. At the installation stage, leave 25mm of the framing off the wall.

After plastering and painting, the EPÄSUORA Z profile integrates seamlessly with plasterboard ceilings to create a sophisticated and uniform lighting effect.

The stylish finish and sturdy aluminium construction make it a great choice for bright interiors. An easy-to-install opal diffuser is included.

Available support bars (I, 90 and L) tie the extensions where required and make it easy to install the profile straight or in corners.

The profile is on display in our warehouse!

Led strips for profile

LED STRIP TO BE ORDERED SEPARATELY.

LED strips up to 23 mm wide fit the profile. Allows 2 narrower led strips to be installed side by side.

Ambient lighting

The most popular solution for indirect lighting is our 14,4W CCT SOLO led strip light. It provides a uniform, temperature-controlled light into the space for an atmospheric effect.

Adequate indirect lighting

The best solution for indirect edge lighting is our 22W or 30W colour temperature adjustable LED strip light. The light output is good (+1000lm/metre) and the walls are beautifully illuminated.

Bright general lighting

Offices or high spaces. For these we recommend using 2x HELMEILE 14,4W/m strip for bright general lighting.

Product information

Required mounting height 50mm

Space required between the collar and the wall 25mm.

Depth of the illuminated surface from the finished 13mm plaster surface 20mm

Profile length: 2 metres.

Diffuser: opal plastic

Material: anodised aluminium