1cm LED light strip SOLO, cut anywhere, 3000K, 24V, 14W/m, IP20, CRI97

COB LED STRIP 3000K 14W/m has beautifully even light. The colour rendering index of the strip is 97 which means that the colours are beautifully reproduced. This LED strip is dimmable. The SOLO "cut anywhere" strip can be cut where you like!

If you want a custom made LED strip or a custom made profile with your own dimensions try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/palvelut/mittatilaus

Product information

The COB LED 14W/m strip light is very uniform and efficient (572 lumens per meter) and has 512 LED circuits per meter. This makes the light uniform.

Installation

The LED strip comes in 25m rolls and can be cut to size anywhere. The strip has power cords at both ends. The red wire is the +, and the black wire is the -. Our LED strip is easy to attach with the 3M very strong tape that comes with it. 

We recommend that for long runs (over 10m), the driver supply is branched at both ends of the LED strip to avoid light degradation at one end of the strip. The led strip should always be attached to an aluminium profile so that excess heat is conducted away from the led circuit. This will prolong the life of the led strip. Aluminium profiles can be ordered from our online shop, where we have a wide range of different profiles available. We also offer a range of branching plugs and connecting wires.

We are happy to help with installation and ordering questions.

Dimming

To dim your LED strip, you can use either a traditional rotary, wired dimmer or our VaLO RF Series wireless dimmer. When using the rotary conventional dimmer, the driverof the LED strip must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the luminaire, but the luminaire is powered by a constant current.

In the case of a smart home, a Zigbee driver and controllers for wireless control are chosen. In Zigbee drivers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Create your own light

Why use SOLO LED strip only for traditional applications when you can make a luminaire out of almost anything? The special tapered design of the strip offers new possibilities! Create your own wall light by bending the LED strip and the aluminium profile to the shape you want, or by fixing the LED strip to another highly heat conductive material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make LED strip made to measure at LedStore's LedShop.