24V BOX FIT LED DRIVER, 30W, IP66, 67 mm x 25 mm
Moisture-proof transformer for 24V led lights, 30W (1,26A). Can only be dimmed from the secondary side. The transformer is round and fits into several different boxes e.g. AP10, AP9 and jewel cases as well as ceiling cups for hanging lamps.
High quality Mean Well power supply for 24V led lights, with 30W (1,26A) load capacity. The power supply has a single output, which can be branched to multiple strips if required. The power supply has approx. 15cm wires at both ends. The power supply can be dimmed from one side by wireless dimmers, such as the 12V/24V wireless dimmer.
You can connect to this power supply in total:
- max. 3,6m of 7,2W/m LED strip
- max. 1,8m HELMEILE 14,4W/m led strip max
- max. 1,5m FLAT 17W/m led strip
Dimensions
- Diameter: 67 mm (measured up to the bend of the wires)
- Height: 25 mm
- Weight: 121 g
- Fits in the following boxes: AP10, AP9, jewellery box, etc
Protection and more:
3-year warranty. The transformer is waterproof, making it suitable for outdoor use, IP66.
No plug, no LED strip connector/DC plug.
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?