Be the first to review this product
Adjustable & recessed LED downlight kit 7pcs 3W dimmable spots, white
Adjustable and directional LED light set with 7 bulbs (white or silver). The color rendering index is over 85 and the light output is equivalent to a 15W halogen bulb per lamp.
Directional led spotlight kit
This LED spotlight set is suitable for supplementary lighting such as light spots and wall surface accent lighting. The spots are ideal for creating atmospheric lighting as they are compact and dimmable. We do not recommend this light for general lighting, but rather for accent lighting and pathway lighting, although it is efficient for its size.
Our secret ingredients are Cree's latest LED chips, with a colour rendering index of over 85 and excellent thermal conductivity. One bulb is equivalent in luminous intensity to 15W halogen, which in lumens is 200.
The same model is also available in white. For humid areas and terrace installations, a spotlight series in silver and white is also available. For humid areas, a well protected IP44 model is available on request. All models are available in 3000K (warm white) and 4000K (neutral white).
Click here for installation examples and inspiration pictures
Installation is possible in very low spaces. The height of the light is only 30mm and when oriented only 33mm. The diameter of the spot's mounting hole is 41-45mm. The light can be oriented between 0-15 degrees. The size of the power supply is 110x50x35mm. These fine mill sizes allow installation in a standard ceiling structure with only 48x48mm of insulation and 13mm of plasterboard under the vapour barrier. We recommend installing a piece of board or plasterboard above the light to prevent compression of the insulation.
LED spot kits include the correct size power supply, which depends on the size of the kit i.e. 3-4pcs kits, 5-6pcs kits and 7-8pcs kits all require a different power supply. Removing one bulb cuts the voltage and the lights go out. Therefore, do not leave any part of a set of lamps uninstalled, as this is likely to break the set. If you find that you have ordered the wrong number of bulbs in a set, please contact us and we will correct the problem. Led spot set spots have approximately 1.4m of cable from the spot to the power supply.
The power supply should always be placed in a dry area. If the installation is made in a bathroom (room IP44 model), the power supply is usually installed in a drop ceiling. We recommend to install a service hatch in the ceiling as well. If the installation is made in a recessed ceiling or outside, the power supply and the cable distributor must be protected against moisture, for example by placing them inside a moisture-proof box. The power supply is fitted with a black test lead which is posted when the power supply is connected to the mains. The lamp does not have a plug, but this is available as a special order.
You can count on us
With a superior five-year warranty on the LED and a three-year warranty on the power supply, you're in for a treat. All thanks to LedStore's decisively superior technology. All our lights are CE and RoHS approved.
Each light comes with a dimmable power supply. We have moved the power supply to the outside of the light so that it does not unnecessarily heat up the light. The separate power supply also keeps the size of the light small. The power supply of the light is dimmable with TRIAC dimmers from the PRIMARY side and works with home automation systems such as KNX and Talomatti. Suitable dimmers can be found in our shop:"Led dimmers"
For example, LED bulbs for LED lights:
ABB (former Ensto) Jussi model 6523U
Schneider (ex strГ¶mfors) transistor controller 315W/VA, EXXACT.
|Guarantee (year)||5 years|
|Colour rendering (CRI ±3)||90|
|Dimensions||Installation hole 40mm, lamp diameter 51mm, lenght 30mm|
|Approved||CE, RoHS, IP21|
|Energy class||B (185lm/W)|
|Muuta||Driver Included, dimmable|
Can be installed in a very small spaCE. The height of one led spot is 30mm (33mm when tilted). The cut out size is 41-45mm. The led spot can be tilted 0-15 degrees. This LED LIGHT SET fits to typical CEiling structure where there is 48x48mm frame and 13mm plaster board. We recommend you to install plaster board or such on to of the spot if there is a possibility thta the insulation will press the led spot down.
LED LIGHT SET comes with a dimmable driver. Driver does not fit in from the light holes, so you need to make a maintenanCE hole into the CEiling or nearby wall for maintenanCE. All sets are build to order, so the have the right size driver included depending on the amount of lights. Measurements of the driver are 110x50x35mm. There is a cable of 1,4m between each light and the driver. Driver has a black test cable, taht should be removed when installed to main (230V).
ALWAYS INSTALL ALL LIGHTS ORDERED TO THE DRIVER!
The 3-4 set, 5-6 set and 7-8 set all have a different driver, so if not all lights are installed, the driver and the lights might break. Taking out one light will cut off light to other laps as well. If you descover you have ordered the wrong set or want to plaCE the lights you ordered in a different way, please be in contact and we will sort you out.
Driver is not water resistant, so it should be installed to a dry place.
Driver can be ordered with plug (special order) or IP44!